Heftnadeln für Bohrschablonen TEMPORARY FASTENERS FOR DRILL JIGGS Temporary Fasteners for Drill Jiggs with large clamping area and flexible diameters and clamping lengths Heftnadeln für Bohrschablonen mit großer Auflagefläche und flexibel angepassten Durchmessern / Längen Features • Completely flexible for any clamping diameter starting from 1/8” (3.20 mm) • Spring Loaded Available • Very long clamping length possible (less fasteners needed) • Clamping force reaches up to 1500 NM on a small diameter of 3.20 mm (more clamping force for larger diameters) • Large clamping area due to the front end divided in 4 sections. • Torque-controlled and battery powered Driver available EH10 / EH15 EH20 / EH25 Eigenschaften • Flexibler Durchmesser ab 3,20 mm (1/8”) • Mit Nachspannfeder erhältlich • Sehr großer Spannbereich möglich (es werden weniger Heftnadeln benötigt) • Klemmkraft bis 1500 NM bei dem kleinsten Durchmesser von 3.2 mm (mehr Klemmkraft bei größeren Durchmessern möglich) • Große Auflagefläche durch den 4 geteilten Auflagebereich und das Design der Nadel • Drehmomentgesteuertes, batteriebetriebenes Einsetzwerkzeug verfügbar EH100 EH30 Weitere Informationen auf Anfrage / MORE INFORMATION ON REQUEST 1InhaltsverzeichnisIndex

Art.Nr./PART NO. 2071Z-20 2071Z-24 2071Z-26 2071Z-32 2071Z-40 2071Z-48 Art.Nr./PART NO. KWIK-LOK K-1/16 K-7/32 K-1/4 WEDGELOCK M-1/16 M-7/32 M-1/4 Art.Nr./PART NO. KWIK-LOK WEDGELOCK KHD-3/32 MHD-3/32 KHD-1/8 MHD-1/8 KHD-5/32 MHD-5/32 KHD-3/16 MHD-3/16 KHD-7/32 MHD-7/32 KHD-1/4 MHD-1/4 Durchmesser DIAMETER Spannber. Federheftnadel, zangenbetätigt FASTENERS, SPRING-LOADED, PLIER-OPERATED 5/64“ 3/32“ #38 1/8“ 5/32“ 3/16“ 0-6 mm 0-6 mm 0-6 mm 0-6 mm 0-6 mm 0-6 mm GRIP 0-1/4" 0-1/4" 0-1/4" 0-1/4" 0-1/4" 0-1/4" Farbe schwarz braun silber kupfer gelb silber 2,0 mm 2,4 mm 2,6 mm 3,2 mm 4,0 mm 4,8 mm Federheftnadel, zangenbetätigt FASTENERS, SPRING-LOADED, PLIER-OPERATED Durchmesser DIAMETER Spannber. 1,6 mm 5,6 mm 6,4 mm 1/16" 7/32“ ¼“ 0-6 mm 0-6 mm 0-6 mm GRIP 0-1/4" 0-1/4“ 0-1/4“ Farbe schwarz zink kupfer Federheftnadel, zangenbetätigt FASTENERS, SPRING-LOADED, PLIER-OPERATED Durchmesser DIAMETER Spannber. 2,4 mm 3,2 mm 4,0 mm 4,8 mm 5,6 mm 6,4 mm 3/32“ 1/8“ 5/32“ 3/16“ 7/32“ 1/4“ 0-12,7 mm 0-12,7 mm 0-12,7 mm 0-12,7 mm 0-12,7 mm 0-12,7 mm GRIP 0-1/2" 0-1/2" 0-1/2" 0-1/2" 0-1/2" 0-1/2" Farbe zink kupfer schwarz messing zink kupfer Federheftnadel, handbetätigt FASTENERS, SPRING-LOADED, HAND-OPERATED COLOR black brown silver copper yellow silver COLOR black zinc copper COLOR zinc copper black brass zinc copper Art.Nr./PART NO. 2071HZ-32 Durchmesser DIAMETER 3,2 mm 1/8“ Spannber. 0-6 mm GRIP 0-1/4" Farbe kupfer COLOR copper Heftnadelzange, für Heftnadeln und Blechklemmen PLIER FOR FASTENERS AND CLAMPS Art.Nr./PART NO. Art.Nr./PART NO. TP-74 2050 Andere Abmessungen auf Anfrage / OTHER DIMENSIONS ON REQUEST 3InhaltsverzeichnisIndex

Schraubheftnadeln, mit Flügelmutter FASTENERS, WING NUT TYPE DIAMETER Spannber. GRIP (G) Farbe COLOR (G) 0-12,7 mm 0-12,7 mm 0-12,7 mm 0-12,7 mm 0-12,7 mm 0-12,7 mm 0-12,7 mm 0-25,4 mm 0-25,4 mm 0-25,4 mm 0-25,4 mm 0-25,4 mm 0-25,4 mm 0-25,4 mm 12,7-38,1 mm 12,7-38,1 mm 12,7-38,1 mm 12,7-38,1 mm 12,7-38,1 mm 12,7-38,1 mm 38,1-63,5 mm 38,1-63,5 mm 38,1-63,5 mm 38,1-63,5 mm 38,1-63,5 mm 0-1/2“ 0-1/2“ 0-1/2“ 0-1/2“ 0-1/2“ 0-1/2“ 0-1/2“ 0-1“ 0-1“ 0-1“ 0-1“ 0-1“ 0-1“ 0-1“ silber kupfer schwarz messing silber kupfer silver copper black brass silver copper schwarz black silber kupfer schwarz messing silber kupfer silver copper black brass silver copper schwarz black silber kupfer 1/2-1.1/2“ 1/2-1.1/2“ 1/2-1.1/2“ schwarz 1/2-1.1/2“ messing 1/2-1.1/2“ kupfer 1/2-1.1/2“ schwarz 1.1/2-2.1/2“ kupfer 1.1/2-2.1/2“ schwarz 1.1/2-2.1/2“ messing 1.1/2-2.1/2“ kupfer 1.1/2-2.1/2“ schwarz silver copper black brass copper black copper black brass copper black Art.Nr./PART NO. Durchmesser (D) WING NUT PART NO. CROSS REF. EQUIVALENT KWN-FW-3/32 WNX-3/32 KWN-FW-1/8 WNX-1/8 KWN-FW-5/32 WNX-5/32 KWN-FW-3/16 WNX-3/16 KWN-FW-7/32 WNX-7/32 KWN-FW-1/4 WNX-1/4 KWN-FW-5/16 KWNL-FW-3/32 WNX-5/16 WNXL-3/32 KWNL-FW-1/8 WNXL-1/8 KWNL-FW-5/32 WNXL-5/32 KWNL-FW-3/16 WNXL-3/16 KWNL-FW-7/32 WNXL-7/32 KWNL-FW-1/4 WNXL-1/4 KWNL-FW-5/16 KWNEL-FW-3/32 WNXL-5/16 WNXEL-3/32 KWNEL-FW-1/8 WNXEL-1/8 KWNEL-FW-5/32 WNXEL-5/32 KWNEL-FW-3/16 WNXEL-3/16 KWNEL-FW-1/4 WNXEL-1/4 KWNEL-FW-5/16 KWNK-FW-1/8 WNXEL-5/16 WNXK-1/8 KWNK-FW-5/32 WNXK-5/32 KWNK-FW-3/16 WNXK-3/16 KWNK-FW-1/4 WNXK-1/4 KWNK-FW-5/16 WNXK-5/16 2,4 mm 3,2 mm 4,0 mm 4,8 mm 5,6 mm 6,4 mm 7,9 mm 2,4 mm 3,2 mm 4,0 mm 4,8 mm 5,6 mm 6,4 mm 7,9 mm 2,4 mm 3,2 mm 4,0 mm 4,8 mm 6,4 mm 7,9 mm 3,2 mm 4,0 mm 4,8 mm 6,4 mm 7,9 mm (D) 3/32“ 1/8“ 5/32“ 3/16“ 7/32“ 1/4“ 5/16“ 3/32“ 1/8“ 5/32“ 3/16“ 7/32“ 1/4" 5/16“ 3/32“ 1/8“ 5/32“ 3/16“ 1/4“ 5/16“ 1/8“ 5/32“ 3/16“ 1/4" 5/16“ PART NUMBER EXAMPLE: K WN S – FW – 3/32 Kwik-Lok FW – Free Wheeling HN = Hex Nut, WN = Wing Nut Length S, L, EL, K Hole Size 5InhaltsverzeichnisIndex

Schraubheftnadel, Zylindrisch, mit Nachspannfeder CYLINDRICAL BODY FASTENERS – SPRING LOADED Art.Nr./PART NO. DIAMETER GRIP RANGE CSX-BF-3/32 CSX-BF-1/8 CSX-BF-5/32 CSX-BF-3/16 CSX-BF-7/32 CSX-BF-1/4 CSX-BF-9/32 CSX-BF-5/16 CSX-BF-3/8 CSXL-BF-3/32 CSXL-BF-1/8 CSXL-BF-5/32 CSXL-BF-3/16 CSXL-BF-7/32 CSXL-BF-1/4 CSXL-BF-9/32 CSXL-BF-5/16 CSXL-BF-3/8 CSXEL-BF-3/32 CSXEL-BF-1/8 CSXEL-BF-5/32 CSXEL-BF-3/16 CSXEL-BF-7/32 CSXEL-BF-1/4 CSXEL-BF-9/32 CSXEL-BF-5/16 CSXEL-BF-3/8 CSXK-BF-1/8 CSXK-BF-5/32 CSXK-BF-3/16 CSXK-BF-7/32 CSXK-BF-1/4 CSXK-BF-9/32 CSXK-BF-5/16 CSXK-BF-3/8 3/32” 1/8” 5/32” 3/16“ 7/32“ 1/4“ 9/32“ 5/16“ 3/8“ 3/32” 1/8” 5/32” 3/16“ 7/32“ 1/4“ 9/32“ 5/16“ 3/8“ 3/32” 1/8” 5/32” 3/16“ 7/32“ 1/4“ 9/32“ 5/16“ 3/8“ 1/8” 5/32” 5/32” 7/32“ 1/4" 9/32“ 5/16“ 3/8“ 0-1/2“ 0-1/2“ 0-1/2“ 0-1/2“ 0-1/2“ 0-1/2“ 0-1/2“ 0-1/2“ 0-1/2“ 1/2-1” 1/2-1” 1/2-1” 1/2-1” 1/2-1” 1/2-1” 1/2-1” 1/2-1” 1/2-1” 1-1.1/2” 1-1.1/2” 1-1.1/2” 1-1.1/2” 1-1.1/2” 1-1.1/2” 1-1.1/2” 1-1.1/2” 1-1.1/2” 2-2.1/2” 2-2.1/2” 2-2.1/2” 2-2.1/2” 2-2.1/2” 2-2.1/2” 2-2.1/2” 2-2.1/2” BODY LENGTH OVERALL (inches) 4-17/32 4-9/16 4-19/32 4-5/8 4-39/64 4-21/32 4-21/32 4-21/32 4-3/4 5-1/32 5-1/16 5-3/32 5-1/8 5-7/64 5-5/32 5-5/32 5-5/32 5-1/4 5-17/32 5-9/16 5-19/32 5-5/8 5-39/64 5-21/32 5-21/32 5-21/32 5-3/4 6-9/16 6-5/8 6-5/8 6-41/64 6-21/32 6-21/32 6-21/32 6-3/4 INSTALLED (inches) 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-7/8 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-7/8 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-7/8 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-27/32 3-7/8 COLOR zinc copper black brass zinc copper brass black black & brass cap zinc copper black brass zinc copper brass black black & brass cap zinc copper black brass zinc copper brass black black & brass cap copper black black zinc copper brass black black & brass cap Pneumatic Installation & Removal Tool Manual Installation & Removal Tool CBHT-01 PART NUMBER EXAMPLE: CBXEL-BF-1/8 “BIG FOOT” TYPE CLAMP (CS = Spring Loaded) GRIP (X, XL, XEL, XK) BASIC PART NO. (CB = Standard) DIAMETER (Fractional or metric) W500-30-931GB Features: • max. 3000 rpm • max. torque 25 in/lbs • incl. Guide Bushing • incl. internal air flow control to adjust clamping force from 100 to 600 pounds. 7InhaltsverzeichnisIndex

Kniehebelspanner / TOGGLE PLIERS KNU-VISE 1 Spindel, ohne Gummipuffer / 1 Spindle without Rubber Pad P-400 P-400-2S = 2 Spindeln, ohne Gummipuffer / 2 Spindles without Rubber Pads P-400-2S-1 = 2 Spindeln, mit 1 Gummipuffer / 2 Spindles with 1 Rubber Pad P-400-2S-2 = 2 Spindeln, mit 2 Gummipuffer / 2 Spindles with 2 Rubber Pads 1 Spindel, mit Gummipuffer / 1 Spindle with Rubber Pad Typ-Nr. MODEL P-400 P-400-2S P-400-1 P-400-2S-1 P-400-2 P-400-2S-2 (A) Max. Materialstärke MAX. CLAMP THICK. (A) Maximaldruck Gewicht LOAD WEIGHT 23/32" (18 mm) 400 Lbs (180 kg) 0.30 lbs. (0.14 kg) 19/32" (15 mm) 400 Lbs (180 kg) 0.30 lbs. (0.14 kg) 9/16" (14 mm) 400 Lbs (180 kg) 0.30 lbs. (0.14 kg) 7/16" (11 mm) 100 lbs. (45 kg) 0.30 lbs. (0.14 kg) P-400-1 5/16" (8 mm) 100 lbs. (45 kg) 0.30 lbs. (0.14 kg) 1 Spindel, mit 2 Gummipuffer / 1 Spindle with 2 Rubber Pads 3/16" (4,8 mm) 100 lbs. (45 kg) 0.30 lbs. (0.14 kg) P-400-2 P-402-1 = 1 Spindel, mit 1 Gummipuffer / 1 Spindles with 1 Rubber Pad P-402-2S = 2 Spindeln, ohne Gummipuffer / 2 Spindles without Rubber Pads P-402-2S-2 = 2 Spindeln, mit 2 Gummipuffer / 2 Spindles with 2 Rubber Pads 1 Spindel, ohne Gummipuffer / 1 Spindle without Rubber Pad Typ-Nr. MODEL P-402 P-402-1 P-402-2S P-402-2S-2 (A) Max. Materialstärke MAX. CLAMP THICK. (A) Maximaldruck Gewicht LOAD WEIGHT 1.3/4" (45.5 mm) 400 Lbs (180 kg) 0.36 lbs. (0.16 kg) 1.1/2" (38.1 mm) 100 lbs. (45 kg) 0.36 lbs. (0.16 kg) 1.1/2" (38.1 mm) 400 Lbs (180 kg) 0.38 lbs. (0.17 kg) 1.1/8" (28.6 mm) 100 lbs. (45 kg) 0.39 lbs. (0.18 kg) P-402 9InhaltsverzeichnisIndex

Kniehebelspanner / TOGGLE PLIERS KNU-VISE Typ-Nr. MODEL P-803 (A) Max. Materialstärke MAX. CLAMP THICK. (A) Maximaldruck LOAD Gewicht WEIGHT 2.7/32" (56.4 mm) 700 lbs. (318 kg) 1.28 lbs. (0.58 kg) P-803 * * Mit Schnelllösehebel und 1 Spindel mit Gelenkfuss * Included Quick Release Lever and 1 Swivel Foot Spindle 2 Spindeln, Sechskantkopf P-804 * 2 Hex Head Spindles Typ-Nr. MODEL P-804 (A) Max. Materialstärke MAX. CLAMP THICK. (A) Maximaldruck LOAD Gewicht WEIGHT 3.1/2" (88.9 mm) 600 lbs. (272 kg) 1.36 lbs. (0.62 kg) * Auch mit Schnelllösehebel lieferbar ! * Also available with Quick Release Lever ! Typ/Mod.: LUP-804 11InhaltsverzeichnisIndex

Kniehebelspanner / TOGGLE PLIERS KNU-VISE Typ-Nr. A Maximal- druck B C D Länge Klemmtiefe Gewicht E Öffnungs- weite F Max. Material- stärke MODEL LOAD LENGTH THROAT DEPTH Einfach-Spindel / SINGLE SPINDLE JAW OPENING WEIGHT MAX. CLAMP THICK. P-1200x4 P-1203x4 P-1204x4 P-1206x4 P-1200x6 P-1203x6 P-1204x6 P-1206x6 P-1200x8 P-1203x8 P-1204x8 P-1206x8 P-1200x4-2S P-1203x4-2S P-1204x4-2S P-1206x4-2S P-1200x6-2S P-1203x6-2S P-1204x6-2S P-1206x6-2S P-1200x8-2S P-1203x8-2S P-1204x8-2S P-1206x8-2S P-1203x4-L P-1204x4-L P-1206x4-L P-1203x6-L P-1204x6-L P-1206x6-L P-1203x8-L P-1204x8-L P-1206x8-L 600 lbs. 270 kg 600 lbs. 270 kg 600 lbs. 270 kg 600 lbs. 270 kg 400 lbs. 180 kg 400 lbs. 180 kg 400 lbs. 180 kg 400 lbs. 180 kg 300 lbs. 135 kg 300 lbs. 135 kg 300 lbs. 135 kg 300 lbs. 135 kg 600 lbs. 270 kg 600 lbs. 270 kg 600 lbs. 270 kg 600 lbs. 270 kg 400 lbs. 180 kg 400 lbs. 180 kg 400 lbs. 180 kg 400 lbs. 180 kg 300 lbs. 135 kg 300 lbs. 135 kg 300 lbs. 135 kg 300 lbs. 135 kg 600 lbs. 270 kg 600 lbs. 270 kg 600 lbs. 270 kg 400 lbs. 180 kg 400 lbs. 180 kg 400 lbs. 180 kg 300 lbs. 135 kg 300 lbs. 135 kg 300 lbs. 135 kg 10 7/16" 265 mm 10 7/16" 265 mm 10 7/16" 265 mm 10 7/16" 265 mm 12 7/16" 316 mm 12 7/16" 316 mm 12 7/16" 316 mm 12 7/16" 316 mm 14 7/16" 367 mm 14 7/16" 367 mm 14 7/16" 367 mm 14 7/16" 367 mm 10 7/16" 265 mm 10 7/16" 265 mm 10 7/16" 265 mm 10 7/16" 265 mm 12 7116" 316 mm 12 7/16" 316 mm 12 7/16" 316 mm 12 7/16" 316 mm 14 7/16" 367 mm 14 7/16" 367 mm 14 7/16" 367 mm 14 7/16" 367 mm 10 7/16" 265 mm 10 7/16" 265 mm 10 7/16" 265 mm 12 7/16" 316 mm 12 7/16" 316 mm 12 7/16" 316 mm 14 7/16" 367 mm 14 7/16" 367 mm 14 7/16" 367 mm 4" 4" 4" 4" 6" 6" 6" 6" 8" 8" 8" 8" 4" 4" 4" 4" 6" 6" 6" 6" 8" 8" 8" 8" 4" 4" 4" 6" 6" 6" 8" 8" 8" 101.6 mm 101.6 mm 101.6 mm 101.6 mm 152.4 mm 152.4 mm 152.4 mm 152.4 mm 203.2 mm 203.2 mm 203.2 mm 101.6 mm 101.6 mm 101.6 mm 101.6 mm 152.4 mm 152.4 mm 152.4 mm 152.4 mm 203.2 mm 203.2 mm 203.2 mm 101.6 mm 101.6 mm 101.6 mm 152.4 mm 152.4 mm 152.4 mm 203.2 mm 203.2 mm 203.2 mm 2.01 lbs. .91 kg 2.31 lbs. 1.05 kg 2.41 lbs. 11.09 kg 2.60 lbs. 1.18 kg 2.48 lbs. 1.13 kg 2.78 lbs. 1.26 kg 2.88 lbs. 1.31 kg 3,07 lbs. 1.39kg 2.94 lbs. 1.33 kg 3.24 lbs. 1.47 kg 3.34 lbs. 1.52 kg 3.53 lbs. 1.60 kg 2.05 LBS. 0.93 KG. 2.41 LBS. 1.09 KG. 2.65 LBS. 1.203 KG. 2.70 LBS. 1.19 KG. 2.52 LBS. 1.4 KG. 2.88 LBS. 1.31 KG. 3.12 LBS. 1.42 KG. 3.17 LBS. 1.44 KG. 2.98 lbs. 1.35 kg 3.34 lbs. 1.52 kg 3.58 lbs. 1.63 kg 3.63 lbs. 1.65 kg 2.35 lbs. 1.07 kg 2.48 lbs. 1.13 kg 2.72 lbs. 1.23 kg 2.92 lbs. 1.33 kg 2.95 lbs. 1.34 kg 3.19 lbs. 1.45 kg 3.28 lbs. 1.49 kg 3.41 lbs. 1.55 kg 3.65 lbs. 1.66 kg 1 3/4" 44.5 mm 3 17/32" 89.7 mm 4 17/32" 115 mm 6 17/32" 166 mm 1 3/4" 44.5 mm 3 17/32" 89.7 mm 4 17/32" 115 mm 6 17/32" 166 mm 1 3/4" 44.5 mm 3 17/32" 89.7 mm 4 17/32" 115 mm 6 17/32" 166 mm 1 3/4" 44.5 mm 3 17/32" 89.7 mm 4 17/32" 115 mm 6 17/32" 166 mm 1 3/4" 44.5 mm 3 17/32" 89.7 mm 4 17/32" 115 mm 6 17/32" 166 mm 1 3/4" 44.5 mm 3 17/32" 89.7 mm 4 17/32" 115 mm 6 17/32" 166 mm 3 17/32" 89.7 mm 4 17/32" 115 mm 6 17/32" 166 mm 3 17/32" 89.7 mm 4 17/32" 115 mm 6 17/32" 166 mm 3 17/32" 89.7 mm 4 17/32" 115 mm 6 17/32" 166 mm G Höhe HEIGHT Min. Material- stärke MIN CLAMP THICK. 0 0 0 0 0 0 3" 76 mm 6" 5" 127 mm 1 19/32" 40.5 mm 3 19/32" 152.4 mm 91.3 mm 5 19/32" 203.2 mm 142.1 mm 8" 3" 76 mm 6" 5" 127 mm 1 19/32" 40.5 mm 3 19/32" 152.4 mm 91.3 mm 5 19/32" 203.2 mm 142.1 mm 8" 3" 76 mm 5" 6" 127 mm 1 19/32" 40.5 mm 3 19/32" 152.4 mm 91.3 mm 5 19/32" 203.2 mm 142.1 mm 8" 1 7/32" 31 mm 2 13/16" 71.4 mm 3 13/16" 96.8 mm 5 13/16" 147.6 mm 1 7/32" 31 mm 2 13/16" 71.4 mm 3 13/16" 96.8 mm 5 13/16" 147.6 mm 1 7/32" 31 mm 2 13/16" 71.4 mm 3 13/16" 96.8 mm 5 13/16" 147.6 mm 3" 5" 6" 8" 3" 5" 6" 8" 3" 5" 6" 8" 5" 6" 8" 5" 6" 8" 5" 6" 8" 76 mm 127 mm 152.4 mm 203.2 mm 76 mm 127 mm 152.4 mm 203.2 mm 76 mm 127 mm 152.4 mm 127 mm 152.4 mm 203.2 mm 127 mm 152.4 mm 203.2 mm 127 mm 152.4 mm 203.2 mm 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Spindel-Nr. SPINDLE NO. 370009 370009 370009 370009 370009 370009 370009 370009 370009 370009 370009 370009 370009 & 370051 370009 & 370028 370029 & 370052 370028 & 370030 370009 & 370051 370009 & 370028 370029 & 370052 370028 & 370030 370009 & 370051 370009 & 370028 370029 & 370052 370028 & 370030 370028 370029 370030 370028 370029 370030 370028 370029 370030 203.2 mm Doppel Spindel / DOUBLE SPINDLE 203.2 mm Einfach-Spindel, volle Länge / FULL LENGTH SINGLE SPINDLE 203.2 mm 13InhaltsverzeichnisIndex

Kniehebel-Spanner / TOGGLE-PLIERS Destaco Haltekraft / Holding Pressure 90 daN Gewicht / Weight 0,20 kg / 0,44 lbs. 90 daN 0,20 kg / 0,44 lbs. 1 Spindel 1 Spindle 2 Spindeln 2 Spindles 150 daN 150 daN 0,25 kg / 0,55 lbs. 0,25 kg / 0,55 lbs. Art.Nr. Part No. Beschreibung Description 1 Spindel 1 Spindle 2 Spindeln 2 Spindles 424 424-2 441 441-2 Art.Nr. Part No. 462 Beschreibung Description 1 Spindel mit Gelenkfuß 1 Spindle with Swivel Foot Haltekraft Holding Pressure Gewicht / Weight 320 daN 0,60 kg / 1,33 lbs. 15InhaltsverzeichnisIndex

Stationäre Niet- und Dimpel-Maschinen Stationary Riveting & Dimpling Machines Weitere Informationen erhalten Sie auf Anfrage More Information on request 17InhaltsverzeichnisIndex

LSRR-400 590-RGK Rückstoßarme Niethämmer, für Döpper mit Schaft 10,2 x 30 / 40,3 mm (Parker Taper) RECOILLESS RIVET HAMMERS, FOR RIVET SETS WITH PARKER TAPER SHANK .401 X 1.164 / 1.11/16" Art.Nr./Part No. Max. Nietleistung / Rated Rivet Länge / Length Gewicht / Weight LSRR-200A LSRR-300A LSRR-400A Capacity Stahl 4,0 mm 4,8 mm 6,4 mm Aluminium Steel 4,8 mm 5/32" 6,4 mm 3/16" 9,5 mm 1/4"" Aluminum 3/16" 1/4" 3/8" mm Inches 192 211 216 7.9/16" 8.5/16" 8.1/2" Kg. 1,3 1,35 1,40 Lbs. 2.8 3.0 3.1 Rückstoßarmer Niethammer, für Döpper mit Schaft 12,6 x 30 / 40,3 mm (Parker Taper) RECOILLESS RIVET HAMMER, FOR RIVET SETS WITH PARKER TAPER SHANK .498 X 1.164 / 1.11/16" Art.Nr./Part No. Max. Nietleistung / Rated Rivet Länge / Length Gewicht / Weight LSRR-600A LSRR-800A Capacity Aluminium Steel Stahl 9,5 mm 5/16" 8,0 mm 9,5 mm 11,1 mm 3/8" Aluminum 3/8" 7/16" mm Inches 266 10.1/2" 330 13" Kg. 1,7 3,2 Lbs. 3.7 7.0 Niethammer-Sortiment, wahlweise mit Niethammer 3-X oder 4-X, im Kunstoffkoffer RIVET GUN KIT WITH RIVET HAMMER 3-X OR 4-X (PLEASE SPECIFY) WITH MOLDED RUBBER-CASE Beschreibung Niethammer Luft-Regulator Rückholfeder Rückholfeder Menge/Qty. 1 1 1 1 1 Öl für Niethammer 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Gegenhalteeisen Gegenhalteeisen Gegenhalteeisen Gegenhalteeisen Döpper, gerade Döpper, gerade Döpper, gerade Döpper, gerade Döpper, gebogen 10° Döpper, gebogen 10° Döpper, gebogen 10° Döpper, gebogen 10° Döpper, flach Döpper, flach Döpper, flach Inhalt / Contents 590-RGK Description Rivethammer Air-Regulator Retainer Spring Retainer Spring Air Tool Oil Bucking Bar Bucking Bar Bucking Bar Bucking Bar Straight Rivet Set Straight Rivet Set Straight Rivet Set Straight Rivet Set Offset Rivet Set 10° Offset Rivet Set 10° Offset Rivet Set 10° Offset Rivet Set 10° Flush Rivet Set Flush Rivet Set Flush Rivet Set Artikel-Nummer / Part-Number 3X oder/or 4X (Bitte angeben / please specify) TP-97 114C-3 115A A1142 638 647 670 681 100A3-3/32" (AN470) 100A3-1/8" (AN470) 100A3-5/32" (AN470) 100A3-3/16" (AN470) 101A3-3/32" (AN470) 101A3-1/8" (AN470) 101A3-5/32" (AN470) 101A3-3/16" (AN470) 101AF-3A 110CB 107A-2 19InhaltsverzeichnisIndex

Flach-Döpper, Standard-Schaft 10,2 x 30/40,3 mm FLUSH RIVET SETS, PARKER TAPER SHANK .401 X 1.164/1.11/16" Gerade Ausführung, Durchmesser 12,7 mm STRAIGHT-TYPE, BODY DIAMETER 1/2" Länge mm / Length Inch Art.Nr. / Part No. 100AF-2A 100AF-3A 100AF-5A 100AF-7A 100AF-8A 64 / 2.1/2" 89 / 3.1/2" 140 / 5.1/2" 191 / 7.1/2" 267 / 10.1/2" Flachdöpper , gerade, mit poliertem Kopf FLUSH-SET,STRAIGHT,WITH POLISHED FACE Art. Nr. Part No. 107A-1 107A-2 107A-3 107A-4 Länge mm Length Inch 70 / 2.3/4" 70 / 2.3/4" 89 / 3.1/2" 140 / 5.1/2" Durchmesser Face Diameter 25,4 / 1" 31,8 / 1.1/4" 31,8 / 1.1/4" 25,4 / 1" Gelenk-Döpper mit Gummihülle FLUSH-SET, SWIVEL-TYPE WITH RUBBER SLEEVE Art. Nr. Part No. 106A Länge Length 83 mm 3.1/4" Durchmesser Face Diameter 31,8 mm 1.1/4" 10° gebogen, Durchmesser 12,7 mm 10° OFFSET-TYPE, BODY DIAMETER 1/2" Art.Nr. / Part No. Länge mm / Length Inch ---- 101AF-3A 101AF-5A 101AF-7A 101AF-8A ---- 89 / 3.1/2" 140 / 5.1/2" 191 / 7.1/2" 267 / 10.1/2" Flachdöpper , gerade, mit Gummiring FLUSH-SET, STRAIGHT, WITH RUBBER GUARD Art. Nr. Part No. 110CA 110CB 110CC Länge mm Length Inch 63,5 / 2.1/2" 63,5 / 2.1/2" 63,5 / 2.1/2" Durchmesser Face Diameter 19,1 / 3/4" 25,4 / 1" 31,8 / 1.1/4" Flachdöpper mit Aluminiumkopf FLUSH-SET, STRAIGHT, WITH ALUMIUM-HEAD Art. Nr. Part No. 107A-2D Länge Length 80 mm 3.5/32" Durchmesser Face Diameter 25,4 mm 1" Flachdöpper, Pilzform FLUSH RIVET SET, MUSHROOM TYPE Flachdöpper,Pilzform, mit Nylon-Ring FLUSH RIVET SET, MUSHROOM TYPE WITH NYLON Art. Nr. Part No. ST1111B-V401K-3 SLEEVE Länge Length 61 mm 2.4" Durchmesser Face Diameter 32 mm 1.1/4" Art. Nr. Part No. 112A Länge Length 76 mm 3" Durchmesser Face Diameter 48 mm 1.7/8" 21InhaltsverzeichnisIndex

Döpper für Niethämmer / RIVET SETS FOR RIVET-HAMMERS ATLAS-COPCO Mod. RRN11P02 Schaftabmessung / Shank dimension: 10,2 x 17,0 mm / .401 x .669 Länge ohne Schaft / Length without shank: 25 mm / 1" Flachdöpper / Flush Rivet Sets Art. Nr. / Part No. Durchmesser / Face Diameter Mit Kalotte für:/ Cupped Type for: AN470 / NASM20470 / LN9198 DAN 5014E-H-3/4" x 25 mm DAN 5014E-H-1.1/8" x 25 mm Art. Nr. / Part No. DAN 5014A-H-2,4 x 25 DAN 5014A-H-3,2 x 25 DAN 5014A-H-4,0 x 25 DAN 5014A-H-4,8 x 25 19,1 mm / 3/4" 28,2 mm / 1.1/8" Nietgröße / Rivet Size 2,4 mm / 3/32" 3,2 mm / 1/8" 4,0 mm / 5/32" 4,8 mm / 3/16" DÖPPER FÜR HI-SHEAR NIETE, STANDARD-SCHAFT 10,2 X 30/40,3 MM DRIVE SETS FOR HI-SHEAR RIVETS, PARKER TAPER SHANK .401 X 1.164/1.11/16" HI-SHEAR DÖPPER, GERADE AUSFÜHRUNG DRIVE SET, STRAIGHT-TYPE Nietgröße 3,2 mm Rivet Size 1/8" Gesamtlänge Length mm / Inch Art.Nr. / Part No. 89 / 3.1/2" 130A-3-1/8 140 / 5.1/2" 130A-5-1/8 Nietgröße 4,0 mm Rivet Size 5/32" Art.Nr. / Part No. 130A-3-5/32 130A-5-5/32 Nietgröße 4,8 mm Rivet Size 3/16" Art.Nr. / Part No. 130A-3-3/16 130A-5-3/16 Nietgröße 6,4 mm Rivet Size 1/4" Art.Nr. / Part No. 130A-3-1/4 130A-5-1/4 HI-SHEAR DÖPPER, 10° GEBOGEN DRIVE SET, OFFSET-TYPE 10° Nietgröße 3,2 mm Rivet Size 1/8" Gesamtlänge Length mm / Inch Art.Nr. / Part No. 89 / 3.1/2” 130A-3-1/8 Nietgröße 4,0 mm Rivet Size 5/32" Art.Nr. / Part No. 130A-3-5/32 Nietgröße 4,8 mm Rivet Size 3/16" Art.Nr. / Part No. 130A-3-3/16 Nietgröße 6,4 mm Rivet Size 1/4" Art.Nr. / Part No. 130A-3-1/4 23InhaltsverzeichnisIndex

Wolfram Gegenhalter / TUNGSTEN BUCKING BARS Andere Formen und Abmessungen sind auf Anfrage lieferbar OTHER SHAPES AND DIMENSIONS ARE AVAILABLE ON REQUEST 25InhaltsverzeichnisIndex

Gegenhalteisen / BUCKING BARS 694 2 lbs. 721 1.3/4 lbs. 730 1.1/4 lbs. 702 2.1/4 lbs. 719 2 lbs. 722 1 lbs. 723 1.1/2 lbs. 736 2.1/2 lbs. 732 3/4 lb. 750D-23 1.1/2 lbs. 750N-1 2.1/4 lbs. 750S- 1 3.1/4 lbs. 692 3 lbs. 720 3/4 lbs. 727 1 lbs. 737 1 lbs. 751Y-11 3/4 lbs. 760B-2 1 lbs. 760B-3 1.1/2 lbs. 760B-7 1.1/2 lbs. 760B-10 3/4 lb. 763 2.1/2 lbs. Schwermetall (Wolfram) Gegenhalteisen sind auf Anfrage lieferbar HEAVY METAL (WOLFRAM) BUCKING BARS ARE AVAILABLE ON REQUEST 27InhaltsverzeichnisIndex

Hand-Nietpressen / HAND RIVET SQUEEZER 360° Schwenkkopf, feststellbar in jeder Position Mit verstellbarem Stößel (max. 15 mm) Schaftaufnahme: 4,76 mm Hub: 8 mm Nietleistung: Aluminium 2,6 mm Stahl 2,0 mm Ohne Nietbügel ! Bitte aus nachstehender Tabelle auswählen! 360° SWIVEL YOKE CAN BE LOCKED POSITION WITH ADJUSTABLE SET HOLDER (MAX. .590") RIVET SHANK 3/16" STROKE: .315" RIVET CAPACITY: ALUMINUM .1024" STEEL .0787" WITHOUT C-YOKE ! PLEASE SELECT FROM FOLLOWING CHART ! IN ANY NZ62 (410510) C-Bügel für NZ62 / C-YOKES FOR NZ62 Artikel-Nr. PART NO. 417002 417007 417012 417052 417057 417062 für Nietschaft FOR RIVET SHANK 3/16" (4,76 mm) 3/16" (4,76 mm) 3/16" (4,76 mm) 3/16" (4,76 mm) 3/16" (4,76 mm) 3/16" (4,76 mm) Abmessungen DIMENSIONS H A 30 mm (1.18") 40 mm (1.57") 60 mm (2.36") 40 mm (1.57") 60 mm (2.36") 100 mm (3.93") 45 mm (1.77") 45 mm (1.77") 45 mm (1.77") 70 mm (2.76") 70 mm (2.76") 70 mm (2.76") 29InhaltsverzeichnisIndex

Pneum. Nietpressen mit C-Bügel / COMPRESSION RIVETERS - C TYPE 114CC & 705-HF 114TCC & 720-HF Steel 3,2 1/8 735-C Model Nietleistung Kalt-Niete (mm) CAPACITY COLD RIVET (INCH) max. Hub (mm) MAX. TRAVEL (INCH) max. Druckkraft mit 6,21 bar MAX. FORCE mit/with 90 P.S.I. max. Kraft ereicht am Hubende: PART OF STROKE AT MAX. FORCE: ca. Gewicht mit Std. C-Bügel APPR. WEIGHT WITH STD. C -YOKE ca. Länge mit Std. C-Bügel APPR. LENGTH with STD C-YOKE Anschluß / AIR INLET 114CC 114TCC 705-HF 720-HF 114-CC Alu 4,0 5/32 14,3 mm 9/16 " 18,69 kn 4200 lbs. 1,6 mm 1/16" 2,0 kg 4.5 lbs. 260 mm 10.1/4" 1/4" NPT Steel 3,2 1/8 705-HF Alu 4,0 5/32 12,7 mm 1/2 " 20,03 kn 4500 lbs. 0,8 mm 1/32" 2,0 kg 4.5 lbs. 260 mm 10.1/4" 1/4" NPT Bügel Nr. Yoke No. 538 958 959 960 961 Reach 38 mm 1.1/2" 51 mm 2" 64 mm 2.1/2" 76 mm 3" 89 mm 3.1/2" Gap 32 mm 1.1/4" 32 mm 1.1/4" 35 mm 1.3/8" 38 mm 1.1/2" 38 mm 1.1/2" Set Hole 4,8 mm 3/16" 4,8 mm 3/16" 4,8 mm 3/16" 4,8 mm 3/16" 4,8 mm 3/16" Width 76 mm 3" 90 mm 3.9/16" 117 mm 4.5/8" 133 mm 5.1/4" 154 mm 6.1/16" Thickness 14,3 mm 9/16" 14,3 mm 9/16" 14,3 mm 9/16" 25,4 mm 1" 25,4 mm 1" Steel 4,8 3/16 720-HF Alu 6,4 1/4 12,7 mm 1/2 " 40,05 kn 9000 lbs. 0,8 mm 1/32" 2,5 kg 5.5 lbs. 362 mm 14" 1/4" NPT Steel 6,4 1/4 735-C Alu 7,9 5/16 14,3 mm 9/16 " 48,95 kn 11000 lbs. 3,2 mm 1/8" 4,6 kg 10.1 lbs. 525 mm 21" 1/4" NPT Steel 4,8 3/16 114-TCC Alu 6,4 1/4 14,3 mm 9/16 " 34,26 kn 7700 lbs. 1,6 mm 1/16" 2,5 kg 5.5 lbs. 362 mm 14" 1/4" NPT 735-C Bügel Nr. Yoke No. 7479 7481 7482 7483 7484 7485 Reach 38 mm 1.1/2" 51 mm 2" 76 mm 3" 38 mm 1.1/2" 64 mm 2.1/2" 64 mm 2.1/2" Gap 32 mm 1.1/4" 38 mm 1.1/2" 38 mm 1.1/2" 51 mm 2" 35 mm 1.3/8" 44 mm 1.3/4" Set Hole 4,8 mm 3/16" 4,8 mm 3/16" 4,8 mm 3/16" 4,8 mm 3/16" 4,8 mm 3/16" 4,8 mm 3/16" Thickness 19,4 mm 3/4" 22,2 mm 7/8" 28,6 mm 1.1/8" 25,4 mm 1" 25,4 mm 1" 28,6 mm 1.1/8" Bitte geben Sie bei Bestellung einer Nietpresse die Art.Nr. des gewünschten C-Bügels an PLEASE SPECIFY C-YOKE PART-NUMBER WHEN ORDERING 31InhaltsverzeichnisIndex

Pneumatische Nietpressen mit Alligator-Kopf COMPRESSION RIVETERS - ALLIGATOR JAW TYPE 740A & 151A 750A Modell - Bügel-Tiefe MODEL - JAW REACH Nietleistung Kalt-Niete CAPACITY COLD RIVETS max. Druckkraft mit 6,21Bar MAX. FORCE WITH 90 PSI 740A - 2.7/8" 151A - 2.7/8" 740A - 5" 151A - 5" 740A - 7" 151A - 7" 750A - 2.7/8" 750A - 5" 750A - 7" 750A - 9.1/8" 740A-2.7/8" 740A-5" 740A-7" 151A-2.7/8" 151A-5" 151A-7" 750A-2.7/8" 750A-5" 750A-7" 750A-9.1/8" max. Kraft ereicht am Hubende PART OF STROKE AT MAX. FORCE 3,2 mm 1/8" 3,2 mm 1/8" 3,2 mm 1/8" 3,2 mm 1/8" 4,8 mm 3/16" 4,8 mm 3/16" 4,8 mm 3/16" 4,8 mm 3/16" 4,8 mm 3/16" 4,8 mm 3/16" Gewicht mit Bügel WEIGHT WITH JAWS 7,5 kg 16.1/2 lbs. 7,3 kg 16 lbs. 9,9 kg 21.3/4 lbs. 9,1 kg 20 lbs. 11,6 kg 25.1/2 lbs. 10,9 kg 24 lbs. 8,6 kg 19 lbs. 11,0 kg 24.1/4" 12,7 kg 28 lbs. 13,1 kg 29 lbs. Länge LENGTH Anschluß AIR INLET 502 mm 19.3/4" 495 mm 19.1/2" 552 mm 21.3/4" 549 mm 21.5/8" 603 mm 23.3/4" 600 mm 23.5/8" 635 mm 25" 685 mm 27" 736 mm 29" 790 mm 31.1/8" 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT 1/4" NPT Alu 4,8 mm 3/16" 4,0 mm 5/32" 4,0 mm 5/32" 3,2 mm 1/8" 3,2 mm 1/8"" 3,2 mm 1/8" 7,9 mm 5/16" 6,4 mm 1/4" 4,8 mm 3/16" 4,8 mm 3/16" Steel 4,0 mm 5/32" 3,2 mm 1/8" 3,2 mm 1/8" 2,4 mm 3/32" 2,4 mm 3/32" 2,4 mm 3/32" 6,4 mm 1/4" 4,8 mm 3/16" 4,0 mm 5/32" 4,0 mm 5/32" 36,19 kn 8150 lbs. 23,14 kn 5200 lbs. 20,85 kn 4695 lbs. 15,13 kn 3400 lbs. 14,88 kn 3350 lbs. 13,35 kn 3000 lbs. 72,38 kn 16300 lbs. 41,70 kn 9390 lbs. 29,84 kn 6720 lbs. 22,82 kn 5140 lbs. Bügel- Satz Nr. JAW - ASSY NO fester Bügel STAT. JAW bewegl. Bügel MOVING JAW Bohrung Set Hole Size Bügel- Tiefe REACH Bügel- Höhe GAP geschlossene Bügelhöhe CLOSED HIGHT Max. Weg MAX. TRAVEL 2460 1767 1769 2460 1767 1769 449 2459 1744 582 35208 35210 35220 2459 1744 582 414 2461 1745 581 35209 35211 35219 2461 1745 581 549 4,76 mm 3/16" 4,76 mm 3/16" 4,76 mm 3/16" 4,76 mm 3/16" 4,76 mm 3/16" 4,76 mm 3/16" 4,76 mm 3/16" 4,76 mm 3/16" 4,76 mm 3/16" 4,76 mm 3/16" 73 mm 2.7/8" 127 mm 5" 178 mm 7" 73 mm 2.7/8" 127 mm 5" 178 mm 7" 73 mm 2.7/8" 127 mm 5" 178 mm 7" 232 mm 9.1/8" 41 mm 1.5/8" 41 mm 1.5/8" 54 mm 2.1/8" 41 mm 1.5/8" 41 mm 1.5/8" 54 mm 2.1/8" 41 mm 1.5/8" 41 mm 1.5/8" 54 mm 2.1/8" 54 mm 2.1/8" 22,23 mm 7/8" 22,23 mm 7/8" 19,05 mm 3/4" 22,23 mm 7/8" 22,23 mm 7/8" 38,10 mm 1.1/2" 22,23 mm 7/8" 22,23 mm 7/8" 19,05 mm 3/4" 19,05 mm 3/4" 20,64 mm 13/16" 34,93 mm 1.3/8" 47,63 mm 1.7/8" 20,64 mm 13/16" 34,93 mm 1.3/8" 42,86 mm 1.11/16" 20,64 mm 13/16" 34,93 mm 1.3/8" 47,63 mm 1.7/8" 63,50 mm 2.1/2" 33InhaltsverzeichnisIndex

Pneum. Nietpressen mit Fußschalter und C-Bügel für Tischmontage FOOT CONTROL COMPRESSION RIVETERS - C TYPE - BENCH MODELS 8000CSA-12.1/2 Bodengestell inkl. Wartungseinheit Pedestal Mounting für/for Mod. 8000CS - 8000CSA - 15KCS - 15KCSA (optional) FC-4 Fußschalter Schlauchlänge ca. 10 Ft. (3 Meter) (im Lieferumfang) max. Nietdurchmesser RIVET DIAMETER CAPACITIES Vollniet Aluminium SOLID ALUMINUM Vollniet Stahl SOLID STEEL Rohrniet Stahl TUBULAR STEEL 1/4" (6,4mm) 1/4" (6,4mm) 1/4" (6,4mm) 1/4" (6,4mm) 3/8" (9,53 mm) 3/8" (9,53 mm) 3/8" (9,53 mm) 3/8" (9,53 mm) 3/16" (4,8 mm) 3/16" (4,8 mm) 3/16" (4,8 mm) 3/16" (4,8 mm) 5/16" (7,9mm) 5/16" (7,9mm) 5/16" (7,9mm) 5/16" (7,9mm) 5/16" (7,9mm) 5/16" (7,9 mm) 5/16" (7,9 mm) 5/16" (7,9 mm) 3/8" (9,53 mm) 3/8" (9,53 mm) 3/8" (9,53 mm) 3/8" (9,53 mm) 8000CS-6 8000CSA-9.1/2 Standard Zubehör Standard Accessoires 15KCSA & 8000CSA Standard C-Bügel Ausladung STANDARD C-YOKES Höhe GAP 5" REACH 6" (152 mm) 9.1/2" (241 mm) 12.1/2" (318 mm) 24.1/2" (622 mm) 6" (152 mm) 9.1/2" (241 mm) 12.1/2" (318 mm) 24.1/2" (622 mm) (127 mm) 5" (127 mm) 5" (127 mm) 5.3/4" (146 mm) 5" (127 mm) 5" (127 mm) 5" (127 mm) 5.3/4" (146 mm) 15KCSA-24.1/2 Artikel-Nr. PART NUMBER max. Druckkraft bei 6,3 bar MAX. FORCE AT 90 PSI 8000CS-6 8000CSA-9.1/2 8000CSA-12.1/2 8000CSA-24.1/2 15KCS-6 15KCSA-9.1/2 15KCSA-12.1/2 15KCSA-24.1/2 8800 LBS (39 kN) 8800 LBS (39 kN) 8800 LBS (39 kN) 8800 LBS (39 kN) 15000 LBS (66 kN) 15000 LBS (66 kN) 15000 LBS (66 kN) 15000 LBS (66 kN) 35InhaltsverzeichnisIndex

Niet- und Warzeinsätze als Satz RIVET SQUEEZER - AND DIMPLE DIE KITS Nieteinsätze / RIVET SQUEEZER SETS Schaftdurchmesser 4,76 mm SHANK DIA 3/16" (.187) Artikel-Nr. / PART NO.: 108A-33PC Inhalt des Satzes / CONTENTS OF THE KIT: 1 Aufbewahrungskasten mit beschrifteteter Steckplatte 5 Nieteinsätze, flach mit 12,7 mm Durchmesser 5 Nieteinsätze, flach mit 9,53 mm Durchmesser 23 Nieteinsätze, Universal-Rundkopf in verschiedenen Längen. Für Nietdurchm. 2,4 mm, 3,2 mm, 4,0 mm, 4,8 mm, 6,35 mm 1 KIT BOX WITH ENGRAVED KIT PLATE 5 RIVET SETS, FLUSH, DIAMETER 1/2" 5 RIVET SETS, FLUSH, DIAMETER 3/8" Warz-Einsätze / DIMPLE DIES Schaftdurchmesser 4,76 mm SHANK DIA 3/16" (.187) Artikel-Nr. / PART NO.: 206A-24PC Inhalt des Satzes / CONTENTS OF THE KIT: 1 Aufbewahrungskasten mit beschrifteteter Steckplatte 12 Paar Warzeinsätze, in 3 Nutzlängen 6,35 mm, 9,53 mm, 12,7 mm. Für Nietdurchm. 2,4 mm, 3,2 mm, 4,0 mm, 4,8 mm, 6,35 mm 1 KIT BOX WITH ENGRAVED KIT PLATE 12 PAIR MALE & FEMALE DIMPLE DIES, WITH BODY LENGTH 1/4", 3/8" AND 1/2" 23 RIVET SETS, CUPPED TYPE, IN DIFFERENT LENGTH, FOR RIVET DIAMETER 3/32", 1/8", 5/32", 3/16" & 1/4" FOR RIVET DIAMETER 3/32", 1/8", 5/32", 3/16" & 1/4" 37InhaltsverzeichnisIndex

Pneumatische Nietfräse / PNEUMATIC RIVET SHAVER SRS10P21-8 Standard Zubehör / STANDARD EQUIPMENT Stützfuß / STABILIZER Spänekorb / SKIRT 1/2" (12,7 mm) * * falls nicht anders angegeben / If not other specified SRS10S21-8 Gewindeaufname / INTERNAL THREAD Luftdruck / AIR PRESSURE Leistung / POWER max. Luftverbrauch / MAX .AIR CONSUMPTION max. Drehzahl / MAX. SPEED Gewicht / WEIGHT (SRS10P) Gewicht / WEIGHT (SRS10S) Luftanschluß / AIR INLET Artikel Nr. Part No. Pistolen-Griff PISTOL GRIP SRS10P21-5 SRS10P21-6 SRS10P21-7 SRS10P21-8 SRS10P21-9 SRS10P21-10 SRS10P21-12 Artikel Nr. Part No. Gerade-Ausführung INLINE SRS10S21-5 SRS10S21-6 SRS10S21-7 SRS10S21-8 SRS10S21-9 SRS10S21-10 SRS10S21-12 Fräser-Durchmesser Cutter Diameter Inch 5/16 3/8 7/16 1/2 9/16 5/8 3/4 mm 7,94 9,53 11,11 12,70 14,29 15,88 19,05 Spänekorb SKIRT Artikel Nr. Part No. 2925-5 2925-6 2925-7 2925-8 2925-9 2925-10 2925-12 Pneumatische Nietfräse mit Zubehör im Koffer PNEUMATIC RIVET SHAVER KIT Inhalt / CONTENS: 1 Nietfräse / RIVET SHAVER SRS10P21 inkl. Stützfuß / inkl. STABILIZER 7 Spänekörbe / Skirts (5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4") 7 Fräser / Cutter (5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4") 590L Artikel Nr. / PART NO.: 590L 1/4"-28 6,2 Bar / 90 psi 1.0 HP / 0,75 kw 12 l/s / 25 cfm 21000 UpM / rpm 1,2 kg / 2,7 lbs 1,1 kg / 2,5 lbs 1/4 NPT Fräser CUTTER Artikel Nr. Part No. ZT108-1 ZT108-2 ZT108-3 ZT108-4 ZT108-5 ZT108-6 ZT108-7 39InhaltsverzeichnisIndex

Pneumatische Schweißnahtfräse / PNEUMATIC WELD SHAVER Zur Bearbeitung von Titan, Edelstahl, Monel und ähnlich hochfestem Material Tiefeneinstellung in Stufen von 0,0254 mm. Fräser-Umdrehungen ca. 2700 UPM FOR USE ON TITANIUM, STAINLESS STEEL, MONEL AND SIMILAR HIGH STRENGTH MATERIALS DEPTH ADJUSTMENT IN INCREMENTS OF .001", CUTTER ROTATION APPR. 2700 RPM ZT 708 ca. 2,7 kg / appr. 6 lbs. Entfernt Schweißnähte flächenbündig, oder in einer fest eingestellten Höhe. Fräst Schweißnähte bis 22,3 mm Breite und 0,8 mm Höhe in einem Arbeitsgang. REMOVE WELDS TO SURFACE PLANE OR TO A PRE-SELECTED HEIGHT. SHAVE WELDS UP TO 7/8" WIDE BY 0.030 INCHES WITH ONE PASS. Kpl. Rollenführung und Fräser gehören nicht zum Lieferumfang. Bitte bei Bedarf mitbestellen. ROLLER ASSEMBLY AND CUTTERS ARE NOT FURNISHED WITH THE MACHINE. PLEASE SPECIFY AT TIME OF ORDER. ZT 708 Hartmetall-Walzenfräser ohne Spanbrecher CARBIDE CUTTER WITHOUT CHIPBREAKER Durchmesser DIAMETER Artikel-Nr. PART NO. ZT 508-20B 1.1/2" (38,10 mm) ZT 508-21B 1.1/2" (38,10 mm) ZT 508-22B 1.1/2" (38,10 mm) Fräser Stärke CUTTER WIDTH 1/2" (12,70 mm) 3/4" (19,05 mm) 3/8" (9,53 mm) Zähne TEETH 49 49 49 Art. Nr. Rollenführung komplett PART NO. ROLLER SHAFT ASSY ZT 709041 ZT 709042 ZT 709040 ZT708 Hartmetall-Walzenfräser mit Spanbrecher CARBIDE CUTTER WITH CHIPBREAKER Durchmesser DIAMETER Fräser Stärke Artikel-Nr. PART NO. CUTTER WIDTH 1/2" (12,70 mm) ZT 508-26B 1.1/2" (38,10 mm) 3/4" (19,05 mm) ZT 508-27B 1.1/2" (38,10 mm) 3/8" (9,53 mm) ZT 508-28B 1.1/2" (38,10 mm) 5/8" (15,88 mm) ZT 508-29B 1.1/2" (38,10 mm) 3/8" (9,53 mm) ZT 508-30B 1.1/2" (38,10 mm) 3/8" (9,53 mm) ZT 508-35B 1.1/2" (38,10 mm) 1/2" (12,70 mm) ZT 508-36B 1.1/2" (38,10 mm) ZT 508-37B 1.1/2" (38,10 mm) 3/4" (19,05 mm) ZT 508-38B 1.1/2" (38,10 mm) 15/16" (23,81 mm) ZT 708-20B 1.1/2" (38,10 mm) 1" (25,40 mm) Zähne TEETH 49 49 49 49 65 36 36 36 49 49 Art. Nr. Rollenführung komplett PART NO. ROLLER SHAFT ASSY ZT 709041 ZT 709042 ZT 709040 ZT 709098 ZT 709040 ZT 709040 ZT 709041 ZT 709042 ZT 708031 ZT 709043 41InhaltsverzeichnisIndex

Pneumatische Walzenfräse / PNEUMATIC SUPER SHAVER Zur Bearbeitung von Titan, Edelstahl, Monel und ähnlichen hochfesten Nieten Tiefeneinstellung in Stufen von 0,0127 mm. Fräser-Umdrehungen ca. 12000 UPM FOR USE ON TITANIUM, STAINLESS STEEL, MONEL AND SIMILAR HIGH STRENGTH FASTENERS DEPTH ADJUSTMENT IN INCREMENTS OF .0005", CUTTER ROTATION APPR. 12000 RPM ZT 507 C STABILISATOR STABILIZER ZT 507053 Fräser, Fräserwelle, Fußstück und Stabilisator gehören nicht zum Lieferumfang. Bitte bei Bedarf mitbestellen. Cutter, Cutter-Shaft, Footpiece and Stabilizer are not furnished with the machine. If required, specify at time of order. Drehung um 2 Achsen Dual Rotating Art. Nr. Fräserwelle, komplett Fräser Stärke PART NO. CUTTER SHAFT ASSY CUTTER WIDTH ZT 5070171 3/8" / 9,53 mm 7/16" / 11,11 mm ZT 5070172 1/2" / 12,70 mm ZT 5070173 3/4" / 19,05 mm ZT 5070174 Art. Nr. Stahl-Fußstück PART NO. STEEL FOOTPIECE ZT 507084 ZT 507084 ZT 507029 ZT 507035 Art. Nr. Nylon Fußstück PART NO. NYLON FOOTPIECE ZT 507041 ZT 507055 Hartmetall-Walzenfräser CARBIDE CUTTER Durchmesser DIAMETER 1.1/8" (28.58 mm) 1.1/8" (28.58 mm) 1.1/8" (28.58 mm) 1.1/8" (28.58 mm) 1.1/8" (28.58 mm) 1.1/8" (28.58 mm) 1.1/8" (28.58 mm) 1.1/8" (28.58 mm) 1.1/8" (28.58 mm) 1.1/8" (28.58 mm) Spanbrecher CHIP BREAKER NEIN / NO NEIN / NO NEIN / NO NEIN / NO JA / YES JA / YES JA / YES NEIN / NO NEIN / NO NEIN / NO Anwendungsbereich APPLICATION Monel, Steel, Titanium Monel, Steel, Titanium Monel, Steel, Titanium, Jo-Bolt Monel, Steel, Titanium NACA, Straylar Rivet, Aluminum, Jo-Bolt NACA, Straylar Rivet, Aluminum, Jo-Bolt NACA, Straylar Rivet, Aluminum, Jo-Bolt A-286 Stainless Steel Rivet A-286 Stainless Steel Rivet Monel, Steel, Titanium Zähne TEETH Fräser Stärke CUTTER WIDTH Artikel-Nr. PART NO. ZT 507-20B 1/2" / 12,70 mm 49 ZT 507-21B 3/4" / 19,05 mm 49 ZT 507-22B 1/2" / 12,70 mm 25 ZT 507-23B 3/8" / 9,53 mm 49 ZT 507-24B 1/2" / 12,70 mm 37 ZT 507-25B 3/4" / 19,05 mm 37 ZT 507-26B 3/8" / 9,53 mm 37 ZT 507-27B 1/2" / 12,70 mm 25 25 ZT 507-28B 3/4"/ 19,05 mm ZT 507-29B 7/16"/11,11 mm 49 43InhaltsverzeichnisIndex

Leichte pneumatische Schweißnahtfräse LIGHT DUTY PNEUMATIC WELD SHAVER Zur Bearbeitung von Titan, Edelstahl, Monel und ähnlich hochfestem Material Tiefeneinstellung in Stufen von 0,0127 mm Fräser-Umdrehungen ca. 3500 UPM FOR USE ON TITANIUM, STAINLESS STEEL, MONEL AND SIMILAR HIGH STRENGTH MATERIALS DEPTH ADJUSTMENT IN INCREMENTS OF .0005", CUTTER ROTATION APPR. 3500 RPM ZT 553 ca. 2,3 kg / appr. 5 lbs. Entfernt Schweißnähte flächenbündig, oder in einer fest eingestellten Höhe. REMOVE WELDS TO SURFACE PLANE OR TO A PRE-SELECTED HEIGHT. Fräst Schweißnähte bis 12,7 mm Breite. SHAVE WELDS UP TO 1/2" WIDE. Kpl. Rollenführung und Fräser gehören nicht zum Lieferumfang. Bitte bei Bedarf mitbestellen. ROLLER ASSEMBLY AND CUTTERS ARE NOT FURNISHED WITH THE MACHINE. PLEASE SPECIFY AT TIME OF ORDER. ZT 553 Hartmetall-Walzenfräser ohne Spanbrecher CARBIDE CUTTER WITHOUT CHIPBREAKER Artikel-Nr. PART NO. Fräser/CUTTER MATERIAL Durchmesser DIAMETER Fräser Stärke CUTTER WIDTH Zähne TEETH VHM / CARBIDE VHM / CARBIDE 1.1/8" (28,58 mm) 1.1/8" (28,58 mm) 1/2" (12,70 mm) 3/8" (9,53 mm) 34 34 ZT 553-26 ZT 553-28 Rollenführung kpl. ROLLER SHAFT ASSY Art. Nr. / PART NO. ZT 550070 ZT 550069 45InhaltsverzeichnisIndex

Senk-Anschlaghalter für hohe Drehzahlen bis 10000 UPM HIGH SPEED MICROSTOP COUNTERSINKS UP TO 10000 RPM Für Senker mit Gewinde 1/4"-28, M6 X 1 oder M8 X 1 FOR COUNTERSINK CUTTERS THREADED 1/4"-28, M6 X 1 OR M8 X 1 • For high volume, accurate countersinking in a production environment • Full ball bearing shaft support for increased life • Heavy duty ball thrust bearing ensures depth repeatability • Fail-safe design accomplished with integrated shoulder on shaft • Debris filter prevents chips and dust from contaminating bearings • .0005'' depth adjustment, 5/16'' shaft travel • Right-hand threaded lock nut prevents jamming of adjustment mechanism • Multiple skirt configuration options • Multiple shaft configuration option Art des Spänekorbs TYPE OF SKIRT Standard, Stahl / STANDARD, STEEL Nylon-Ring / NYLON INSERT Nylon-Ring mit Flansch / NYLON FLANGE INSERT Standard, Stahl / STANDARD, STEEL Nylon-Ring / NYLON INSERT Nylon-Ring mit Flansch / NYLON FLANGE INSERT Standard, Stahl / STANDARD, STEEL Nylon-Ring / NYLON INSERT Nylon-Ring mit Flansch / NYLON FLANGE INSERT Glockenform, Stahl / BELL-TYPE, STEEL Auch mit Pendelschaft beziehbar ALSO AVAILABLE WITH SWIVEL SHANK 444 Gewinde THREAD 1/4"-28 1/4"-28 1/4"-28 Verstellbar / INCREMENTS 0.0127 mm / 0.0005” Max. Hub / MAX. TRAVEL 7,94 mm / 5/16” Artikel-Nr. PART-NO. 444S1 444N1 444H1 444S4 444N4 444H4 444S6 444N6 444H6 444D6 max. Senkergröße MAX. CUTTER DIA 19,05 mm / 3/4" 19,05 mm / 3/4" 19,05 mm / 3/4" 19,05 mm / 3/4" 19,05 mm / 3/4" 19,05 mm / 3/4" 19,05 mm / 3/4" 19,05 mm / 3/4" 19,05 mm / 3/4" 25,40 mm / 1" M8 X 1 M8 X 1 M8 X 1 M8 X 1 M6 X 1 M6 X 1 M6 X 1 S (444S) Straight 3/4” Capacity E (444E) Straight Cutaway 3/4” Capacity F (444F) Flanged 3/4” Capacity G (444G) Flanged Cutaway 3/4” Capacity B (444B) 2-Legged 3/4” Capacity A (444A) Phenolic Insert 3/4” Capacity Spähnekörbe / SKIRTS C (444C) Close 5/16” Capacity D (444D) Bell 1” Capacity W (444W) Flanged Bell 1” Capacity J (444J) .532 OD .332 Capacity K (444K) .600 OD .400 Capacity N (444N) Nylon Insert 3/4” Capacity H (444H) Nylon Flange Insert 3/4” Capacity EXTENDED SKIRTS: 2-3/4” Extension (Includes extension shaft) LA (444LA) 10-32 Female Thread 1/4 ID X 3/8 OD INSERTS 444-37P Phenolic OD .960 444-37N Nylon OD .960 444-37NF Nylon OD 1.25 LB (444LB) 1/4-28 Female Thread 5/16 ID X 7/16 OD LC (444LC) 1/4-28 Female Thread 3/8 ID X 1/2 OD LD (444LD) 1/4-28 Female Thread 5/8 ID X 3/4 OD 47InhaltsverzeichnisIndex

Micro-Stop Vakuum Adapter für ZT680S/-SPI MICRO-STOP VACUUM ADAPTER FOR ZT680S/-SPI Capacity 1" (Senkanschlaghalter gehört nicht zum Lieferumfang) (MICRO-STOP IS NOT INCLUDED) ArtikelNr./ PART NO.: EH2012 Senk-Anschlaghalter für Drehzahlen bis max. 3000 UPM MICRO-STOP-COUNTERSINKS FOR SPEEDS UP TO 3000 RPM FOR COUNTERSINK CUTTERS THREADED 3/8"-24 and 7/16"-20 JUMBO SIZE MICROSTOPS 432 462H3-1.3 • For production environment countersinking of larger sized holes • Fail-safe design accomplished with integrated shoulder on shaft • All shafts feature wrenching flats to aid in removal of cutter after use • Ball thrust bearing ensures depth repeatability Artikel-Nr. PART-NO. 432A 432B 462 Gewinde THREAD 7/16”-20 3/8”-24 3/8”-24 Verstellbar INCREMENTS 0,025 mm / .001 0,025 mm / .001 0,075 mm / .003 max. Senkergröße Cutter Capacity 31,75 mm / 1-1/4” 31,75 mm / 1-1/4” 22,23 mm / 7/8” Schaft Shank 3/8’’ Round 3/8’’ Round 3/8’’ Round max. Hub MAX. TRAVEL 19,05 mm / 3/4” 19,05 mm / 3/4” 19,05 mm / 3/4” Gesamtlänge OAL 178 mm / 7” 178 mm / 7” 178 mm / 7” Gewinde THREAD 3/8”-24 3/8”-24 7/16”-20 7/16”-20 Verstellbar INCREMENTS 0,013 mm / .0005 0,013 mm / .0005 0,013 mm / .0005 0,013 mm / .0005 max. Senkergröße Cutter Capacity 31,75 mm / 1-1/4” 34,92 mm / 1-3/8” 31,75 mm / 1-1/4” 34,92 mm / 1-3/8” Schaft Shank 3 Chuck Flat 3 Chuck Flat 3 Chuck Flat 3 Chuck Flat max. Hub MAX. TRAVEL 19,05 mm / 3/4” 19,05 mm / 3/4” 19,05 mm / 3/4” 19,05 mm / 3/4” Gesamtlänge OAL 124 mm / 5” 124 mm / 5” 124 mm / 5” 124 mm / 5” Artikel-Nr. PART-NO. 462H3-1.3 462H3-1.5 462H7-1.3 462H7-1.5 49InhaltsverzeichnisIndex

Senk-Anschlaghalter für Drehzahlen bis max . 6000 UPM MICRO-STOP-COUNTERSINKS FOR SPEEDS UP TO 6000 RPM High Speed Precision Microstop Cage .0005" incremental depth adjustment 1" to 2" cutter capacity • • • Drive shafts are available with 3/8" round (no suffix), 3/8" round with three flats (-TF) recommended 7/16" shaft travel • • The internal thread for the ZT691 series is 3/8-24 and for the ZT692 series it is 7/16-20 ZT691/ZT692 • RATED at 6,000 rpm Model Number ZT691-S-TF ZT691-SPI-TF ZT691-W-TF ZT691-WPI-TF ZT692-S-TF ZT692-SPI-TF ZT692-WPI-TF Shaft Thread 3/8-24 7/16-20 Footpiece OD Footpiece ID 1.62 1.75 1.62 1.28 1.531 1.28 Overall Length 5.0 Cutter Capacity 1.250 1.500 1.250 Anschlaghalter mit langem Hub MICRO-STOP WITH LONG SHAFT TRAVEL EH356HPV-26,5 EH356HP Verstellbar / INCREMENTS 0,025 mm / 0.001“ Schaftdurchm. / SPINDLE DIA 6,00 mm / .2362 Mit Pendelschaft / WITH SWIVEL SHAFT Model Number EH356HP EH356HP-26,5 EH356HPV-26,5 incl. Vacuum-Adapter Gewinde THREAD M6 X 1 M6 X 1 M6 X 1 max. Senkergröße MAX. CUTTER DIA 17 mm / 11/16” 25,4 mm / 1” 25,4 mm / 1” HUB SHAFT TRAVEL 13 mm / .5188 26,5 mm 26,5 mm GESAMTLÄNGE Overall Length 130 mm / 5.1/8” 175 mm / 6.57/64” 175 mm / 6.57/64” 51InhaltsverzeichnisIndex

Halter mit Innengewinde für Senker und Hohlfräser HOLDER WITH INTERNAL THREAD FOR COUNTERSINK CUTTERS AND HOLLOW CUTTERS L1 L2 22 mm (0.866") 8 mm (0.315") 32 mm (1.260") 15 mm (0.591") 32 mm (1.260") 15 mm (0.591") 50 mm (1.969") 20 mm (0.787") 50 mm (1.969") 20 mm (0.787") 50 mm (1.969") 20 mm (0.787") 50 mm (1.969") 20 mm (0.787") 70 mm (2.756") 25 mm (0.984") 130 mm (5.118”) 20 mm (0.787") SENKER FÜR BRILES NIETEN D2 10 mm (0.394") 10 mm (0.394") 10 mm (0.394") 10 mm (0.394") 10 mm (0.394") 12 mm (0.472") 14 mm (0.551") 10 mm (0.394") 10 mm (0.394") COUNTERSINK CUTTER D3 4 mm (0.158") 6 mm (0.236") 6 mm (0.236") 6 mm (0.236") 6 mm (0.236") 6 mm (0.236") 6 mm (0.236") 6 mm (0.236") 6 mm (0.236") PART NO. D1 Artikel-Nr. 202 001 M 6 x 1 202 002 M 6 x 1 202 003 1/4"- 28 202 006 M 6 x 1 202 007 1/4"- 28 202 010 M 8 x 1 3/8"-24 202 011 202 034 1/4"- 28 202 036 1/4"- 28 FOR BRILES FASTENERS MS14218 (BACR15FV) 438BRC-.... Empfohlene Anschlaghalter Serie 444 oder ZT680 RECOMMENDED MICROSTOP SERIE 444 OR ZT680 H C B A Nietgröße RIVET SIZE 1/8" 3,18 mm 5/32" 3,96 mm 3/16" 4,76 mm 7/32" 5,56 mm 1/4" 6,35 mm Gewinde THREAD 1/4"-28 3/8" 9,53 mm 1/4"-28 3/8" 9,53 mm 1/4"-28 3/8" 9,53 mm 1/4"-28 3/8" 9,53 mm 1/4"-28 1/2" 12,7 mm .1625 4,13 mm .2105 5,35 mm .2585 6,57 mm .3125 7,94 mm .3585 9,11 mm .126 3,20 mm .159 4,04 mm .191 4,85 mm .226 5,74 mm .255 6,48 mm .952 24,18 mm .955 24,26 mm .958 24,33 mm .962 24,43 mm .966 24,54 mm J .200 5,08 mm .220 5,59 mm .250 6,35 mm .280 7,11 mm .280 7,11 mm Artikel-Nr. PART NO. 438BRC-4 438BRC-5 438BRC-6 438BRC-7 438BRC-8 53InhaltsverzeichnisIndex

100° COBALT - COUNTERSINK CUTTERS WITH RADIUS (M42) 100° HSCO - Senker mit Radius Artikel-Nr. PART NO. 569 E 10 - 2.38 569 E 10 - 3.17 569 E 10 - 3.50 569 E 10 - 3.60 569 E 10 - 3.96 569 E 10 - 4.00 569 E 10 - 4.35 569 E 10 - 4.76 569 E 10 - 5.08 569 E 10 - 5.49 Artikel-Nr. PART NO. 575 E 14 - 4.76 575 E 14 - 5.00 575 E 14 - 5.60 575 E 14 - 6.00 575 E 14 - 6.27 575 E 14 - 6.65 575 E 14 - 7.08 575 E 14 - 7.84 575 E 14 - 8.25 575 E 14 - 8.63 575 E 14 - 9.04 575 E 17 - 6.27 575 E 17 - 6.65 575 E 17 - 7.08 575 E 17 - 9.42 575 E 17 - 9.82 575 E 17 - 10.21 575 E 17 - 10.61 Körper-Maß BODY-DIA. 10,0 mm (.3937) 10,0 mm (.3937) 10,0 mm (.3937) 10,0 mm (.3937) 10,0 mm (.3937) 10,0 mm (.3937) 10,0 mm (.3937) 10,0 mm (.3937) 10,0 mm (.3937) 10,0 mm (.3937) Körper-Maß BODY-DIA. 14,0 mm (.5512) 14,0 mm (.5512) 14,0 mm (.5512) 14,0 mm (.5512) 14,0 mm (.5512) 14,0 mm (.5512) 14,0 mm (.5512) 14,0 mm (.5512) 14,0 mm (.5512) 14,0 mm (.5512) 14,0 mm (.5512) 17,0 mm (.6693) 17,0 mm (.6693) 17,0 mm (.6693) 17,0 mm (.6693) 17,0 mm (.6693) 17,0 mm (.6693) 17,0 mm (.6693) Mit festem Führungszapfen und kleinem Radius WITH SOLID PILOT AND SMALL RADIUS Zapfen-Maß PILOT DIA. 2,38 mm (.0938) 0,3-0,5 (.0118-.0197) 3,17 mm (.1240) 0,6-0,9 (.0236-.0354) 3,50 mm (.1378) 0,6-0,9 (.0236-.0354) 3,60 mm (.1417) 0,6-0,9 (.0236-.0354) 3,96 mm (.1559) 0,6-0,9 (.0236-.0354) 4,00 mm (.1575) 0,6-0,9 (.0236-.0354) 4,35 mm (.1713) 0,6-0,9 (.0236-.0354) 4,76 mm (.1874) 0,6-0,9 (.0236-.0354) 5,08 mm (.2000) 0,6-0,9 (.0236-.0354) 5,49 mm (.2161) 0,6-0,9 (.0236-.0354) Radius (min.-max.) Gewinde THREAD M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 M6 x 1 Schneiden FLUTES 2 2 2 2 2 2 2 2 2 2 Mit festem Führungszapfen und kleinem Radius WITH SOLID PILOT AND SMALL RADIUS Zapfen-Maß PILOT DIA. 4,76 mm (.1874) 0,6-0,9 (.0236-.0354) 5,00 mm (.1969) 0,6-0,9 (.0236-.0354) 5,60 mm (.2205) 0,6-0,9 (.0236-.0354) 6,00 mm (.2362) 0,6-0,9 (.0236-.0354) 6,27 mm (.2470) 0,6-0,9 (.0236-.0354) 6,65 mm (.2618) 0,6-0,9 (.0236-.0354) 7,08 mm (.2787) 0,6-0,9 (.0236-.0354) 7,84 mm (.3087) 0,6-0,9 (.0236-.0354) 8,25 mm (.3248) 0,6-0,9 (.0236-.0354) 8,63 mm (.3398) 0,6-0,9 (.0236-.0354) 9,04 mm (.3559) 0,6-0,9 (.0236-.0354) 6,27 mm (.2470) 0,6-0,9 (.0236-.0354) 6,67 mm (.2626) 0,6-0,9 (.0236-.0354) 7,05 mm (.2776) 0,6-0,9 (.0236-.0354) 9,42 mm (.3709) 0,6-0,9 (.0236-.0354) 9,82 mm (.3866) 0,6-0,9 (.0236-.0354) 10,21 mm (.4020) 0,6-0,9 (.0236-.0354) 10,61 mm (.4177) 0,6-0,9 (.0236-.0354) Radius (min.-max.) Gewinde THREAD M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 Schneiden FLUTES 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Andere Abmessungen und Winkel auf Anfrage / OTHER DIMENSION AND ANGLES ON REQUEST 55InhaltsverzeichnisIndex

Artikel-Nr. PART NO. MBBN549B-14x2,5-3K10 MBBN549B-14x4,0-3K10 MBBN549B-17x5,0-3K10 MBBN549B-21x5,0-3K10 Für auswechselbare Führungszapfen FOR REPLACEABLE PILOTS Körper-Maß BODY-DIA. 14,0 mm (.3937) 14,0 mm (.3937) 17,0 mm (.4802) 21,0 mm (.8268) Bohrung PILOT HOLE 2,5 mm (.0984) 4,0 mm (.1575) 5,0 mm (.1969) 5,0 mm (.1969) Gewinde THREAD M8 x 1 M8 x 1 M8 x 1 M8 x 1 Schneiden FLUTES 3 3 3 3 100° Voll-Hartmetall-Senker 100° SOLID CARBIDE STOP COUNTERSINK CUTTERS Für auswechselbare Führungszapfen (aufgelöteter Kopf aus VHM) FOR REPLACEABLE PILOTS Körper-Maß BODY-DIA. 10,0 mm (.3937) 10,0 mm (.3937) 10,0 mm (.3937) 10,0 mm (.3937) (SOLID CARBIDE HEAD) Gewinde Bohrung PILOT HOLE THREAD M6 x 1 2,0 mm (.0787) 2,5 mm (.0984) M6 x 1 M6 x 1 3,5 mm (.1378) 4,0 mm (.1575) M6 x 1 Schneiden FLUTES 3 3 3 3 Artikel-Nr. PART NO. MBBN549B-10x2,0-3K10 MBBN549B-10x2,5-3K10 MBBN549B-10x3,5-3K10 MBBN549B-10x4,0-3K10 100° Hartmetall-bestückte-Senker 100° CARBIDE TIPPED STOP COUNTERSINK CUTTERS 2,0 mm (.0787) Führungszapfen für Senker MBBN549... REPLACEABLE PILOTS FOR CUTTER MBBN549... Standard Kombinationen/STANDARD COMBINATIONS 2,5 mm (.0984) 3,5mm (.1378) 4,0 mm (.1575) 5,0 mm (.1969) MBBN549-2,0x2,38 MBBN549-2,0x2,40 MBBN549-2,0x2,50 MBBN549-2,0x3,00 MBBN549-2,5x3,00 MBBN549-2,5x3,17 MBBN549-2,0x3,20 MBBN549-2,5x3,50 MBBN549-2,5x3,80 MBBN549-2,0x4,00 MBBN549-2,5x4,00 MBBN549-3,5x4,00 MBBN549-2,0x4,76 MBBN549-2,0x6,35 MBBN549-2,5x4,05 MBBN549-2,5x4,17 MBBN549-3,5x4,17 MBBN549-3,5x4,71 MBBN549-3,5x4,76 MBBN549-4,0x4,76 MBBN549-3,5x4,80 MBBN549-3,5x4,83 MBBN549-4,0x4,83 MBBN549-3,5x5,10 MBBN549-3,5x5,60 MBBN549-3,5x6,00 MBBN549-3,5x6,35 MBBN549-4,0x6,35 MBBN549-3,5x6,70 MBBN549-4,0x8,00 MBBN549-4,0x6,24 MBBN549-5,0x6,27 MBBN549-5,0x6,67 MBBN549-5,0x7,05 MBBN549-5,0x7,92 MBBN549-5,0x9,52 D S = 2,38 mm (.0937) 2,40 mm (.0945) 2,50 mm (.0984) 3,00 mm (.1181) 3,17 mm (.1248) 3,20 mm (.1260) 3,50 mm (.1378) 3,80 mm (.1496) 4,00 mm (.1575) 4,05 mm (.1594) 4,17 mm (.1642) 4,71 mm (.1854) 4,76 mm (.1874) 4,80 mm (.1890) 4,83 mm (.1902) 5,10 mm (.2008) 5,60 mm (.2205) 6,00 mm (.2362) 6,24 mm (.2457) 6,27 mm (.2469) 6,35 mm (.2500) 6,67 mm (.2626) 6,70 mm (.2638) 7,05 mm (.2776) 7,92 mm (.3118) 8,00 mm (.3150) 9,52 mm (.3748) Andere Abmessungen und Winkel auf Anfrage / OTHER DIMENSION AND ANGLES ON REQUEST 57InhaltsverzeichnisIndex

100° Hartmetall-bestückte-Senker 100° CARBIDE TIPPED STOP COUNTERSINK CUTTERS Körper-Maß BODY-DIA. 3/8" (9,53 mm) 7/16" (11,11mm) 1/2" (12,70 mm) 1/2" (12,70 mm) 1/2" (12,70 mm) 5/8" (15,88 mm) 5/8" (15,88 mm) 3/4" (19,05 mm) 7/8" (22,23 mm) 1" (25,40 mm) 1.1/8" (28,58 mm) 1.1/4" (31,75 mm) 3/4" (19,05 mm) 7/8" (22,23 mm) 1" (25,40 mm) 1.1/8" (28,58 mm) 1.1/4" (31,75 mm) Artikel-Nr. PART NO. 700-100° 701-100° 702-100° 703-100° 704-100° 705-100° 706-100° 707A-100° 708A-100° 709A-100° 710A-100° 711A-100° 707B-100° 708B-100° 709B-100° 710B-100° 711B-100° D S = 1/8" (3,18 mm) #30 (3,26 mm) 5/32" (3,97 mm) #20 (4,09 mm) 3/16" (4,76 mm) #10 (4,91 mm) 7/32" (5,56 mm) 1/4" (6,35 mm) "F" (6,53 mm) 9/32" (7,14 mm) 5/16" (7,94 mm) 11/32" (8,73 mm) 3/8" (9,53 mm) 13/32" (10,32 mm) 7/16" (11,11 mm) 15/32" (11,91 mm) 1/2" (12,70 mm) 17/32" (13,49 mm) 9/16" (14,29 mm) 19/32" (15,08 mm) 5/8" (15,88 mm) 5/64" (1,98 mm) 755-1-5/64" 755-2-5/64" 755-3-5/64" 755-4-5/64" 755-5-5/64" 755-6-5/64" 755-7-5/64" 755-8-5/64" Für auswechselbare Führungszapfen FOR REPLACEABLE PILOTS SERIES 700 Bohrung PILOT HOLE 5/64" (1,98 mm) 5/64" (1,98 mm) 5/64" (1,98 mm) 3/32" (2,38 mm) 1/8" (3,18 mm) 1/8" (3,18 mm) 3/16" (4,76 mm) 3/16" (4,76 mm) 3/16" (4,76 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 1/4" (6,35 mm) 3/16" (4,76 mm) 3/16" (4,76 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 1/4" (6,35 mm) Gewinde THREAD 1/4"-28 1/4"-28 1/4"-28 1/4"-28 1/4"-28 1/4"-28 1/4"-28 3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 7/16"-20 7/16"-20 7/16"-20 7/16"-20 7/16"-20 Schneiden FLUTES 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 Führungszapfen für Senker Serie 700... REPLACEABLE PILOTS FOR CUTTER SERIES 700... Standard Kombinationen/STANDARD COMBINATIONS 3/32" (2,38 mm) 1/8" (3,18 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 755-1-3/32" 755-2-3/32" 755-3-3/32" 755-4-3/32" 755-5-3/32" 755-6-3/32" 755-7-3/32" 755-8-3/32" 755-9-3/32" 755-3-1/8" 755-4-1/8" 755-5-1/8" 755-6-1/8" 755-7-1/8" 755-8-1/8" 755-9-1/8" 755-10-1/8" 755-11-1/8" 755-7-3/16" 755-8-3/16" 755-9-3/16" 755-10-3/16" 755-11-3/16" 755-12-3/16" 755-13-3/16" 755-14-3/16" 755-15-3/16" 755-16-3/16" 755-17-3/16" 755-18-3/16" 755-19-3/16" 755-20-3/16" 755-21-3/16" 755-11-1/4" 755-12-1/4" 755-13-1/4" 755-14-1/4" 755-15-1/4" 755-16-1/4" 755-17-1/4" 755-18-1/4" 755-19-1/4" 755-20-1/4" 755-21-1/4" Andere Abmessungen und Winkel auf Anfrage / OTHER DIMENSION AND ANGLES ON REQUEST 59InhaltsverzeichnisIndex

PCD Tipped Countersinks with Pilot 100°/130° Angle Countersinks, Threaded Shank Part Number 130° 445PCD-C-8-.125 445PCD-C-8-.128 445PCD-D-8-.156 445PCD-D-8-.187 445PCD-E-8-.125 445PCD-E-8-.128 445PCD-E-8-.239 445PCD-G-8-.191 445PCD-G-8-.250 445PCD-H-8-.312 445PCD-J-8-.312 445PCD-K-8-.312 445PCD-M-8-.312 D body dia PD pilot dia No. of Flutes 3/8” 3/8” 7/16” 7/16” 1/2” 1/2” 1/2” 5/8” 5/8” 3/4” 7/8” 1” 1.1/4” 0.125 0.128 0.156 0.187 0.125 0.128 0.239 0.191 0.250 0.312 0.312 0.312 0.312 2 2 2 2 2 2 2 2 2 2 2 2 2 C’ sink angle 100°/130° 100°/130° 100°/130° 100°/130° 100°/130° 100°/130° 100°/130° 100°/130° 100°/130° 100°/130° 100°/130° 100°/130° 100°/130° Shank Thread 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28 1/4”-28 3/8”-24 3/8”-24 7/16”-20 7/16”-20 100° 445PCD-C-4-.125 445PCD-C-4-.128 445PCD-D-4-.156 445PCD-D-4-.187 445PCD-E-4-.125 445PCD-E-4-.128 445PCD-E-4-.239 445PCD-G-4-.191 445PCD-G-4-.250 445PCD-H-4-.312 445PCD-J-4-.312 445PCD-K-4-.312 445PCD-M-4-.312 Part Number WCDR- _ _ _ _ WCDR- _ _ _ _ WCDR- _ _ _ _ PCD Drill Countersinks 100° Angel deg. 100.0 100.0 100.0 Shank Ø d 3/8” 1/2” 1/2" C.D.2 3/8” 1/2” 3/4" Diameter Diameter Ø C.D. from 0.1250 to 0.2500 from 0.2540 to 0.3750 from 0.3800 to 0.5000 FCDR- _ _ _ _ FCDR- _ _ _ _ FCDR- _ _ _ _ P/N Sample with a Ø C.D. of 0.2500 and Wafer/Spiral Tip: WCDR-2500 from 0.0980 to 0.2500 from 0.2540 to 0.3125 from 0.3130 to 0.3540 3/8” 1/2” 3/4" 3/8” 1/2” 1/2" 100.0 100.0 100.0 WCDR: Wafer/Spiral Tip FCDR: Full Nib Tip PCD Drill Countersinks are also available with Thread Andere Abmessungen auf Anfrage / OTHER DIMENSIONS ON REQUEST 61InhaltsverzeichnisIndex

100° Voll-Hartmetall-Schaft-Senker 100° SOLID CARBIDE STRAIGHT SHANK COUNTERSINKS 6- Schneiden, mit aufgelötetem VHM-Kopf 6-FLUTES WITH SOLID CARBIDE HEAD BRAZED TO STEEL SHANK 910-3/8"-100° 910-1/2"-100° 3/8" (9,53 mm) 1/4" (6,35 mm) 2.1/4" (57,2 mm) 1/2" (12,70 mm) 1/4" (6,35 mm) 2.1/2" (63,5 mm) 910-5/8"-100° 910-3/4"-100° 5/8" (15,88 mm) 3/8" (9,53 mm) 2.3/4" (69,9 mm) 3/4" (19,05 mm) 3/8" (9,53 mm) 2.3/4" (69,9 mm) 100° HSS-Schaft-Senker 100° HSS - STRAIGHT SHANK COUNTERSINKS 3-Schneiden 3-FLUTES 408A-4 1/4" (6,35 mm) 3/16" (4,76 mm) 1.1/2" (38,1 mm) 408B-4 5/16" (7,94 mm) 1/4" (6,35 mm) 1.1/2" (38,1 mm) 408C-4 3/8" (9,53 mm) 1/4" (6,35 mm) 1.3/4" (44,5 mm) 408D-4 7/16" (11,11 mm) 1/4" (6,35 mm) 1.3/4" (44,5 mm) 408E-4 1/2" (12,70 mm) 1/4" (6,35 mm) 2" (59,8 mm) 100° Mini-Anschlagsenker (Korbsenker) 100° MINIATURE-STOP-COUNTERSINK CUTTER Artikel-Nr. PART NO. Körper-Maß BODY-DIA. Schaftdurchmesser SHANK DIAMETER Gesamtlänge ca. APPR. O/A LENGTH Artikel-Nr. PART NO. Körper-Maß BODY-DIA. Schaftdurchmesser SHANK DIAMETER Gesamtlänge ca. APPR. O/A LENGTH HSS-E, 2-Schneiden, Schaft 6 mm, Gesamtlänge 33 mm inkl. 1 auswechselbarem Führungszapfen HSS-E, 2-FLUTES, SHANK .236, OVER ALL LENGTH 1.19/64" INCL. 1 REPLACEABLE PILOT Norm: LN9199, DIN 65399, AN426, NASM20426 Artikel-Nr. PART NO. d D D1 402-1/8" 402-3/32" 3/32" (2,38 mm) 1/8" (3,18 mm) .2244 (5,70 mm) .1772 (4,50 mm) .5118 (13,0 mm) .5118 (13,0 mm) 402-3/16" 402-5/32" 5/32" (3,97 mm) 3/16" (4,76 mm) .3504 (8,90 mm) .2835 (7,20 mm) .6229 (15,8 mm) .5512 (14,0 mm) 402-1/4" 1/4" (6,35 mm) .4764 (12,1 mm) .7480 (19,0 mm) Führungszapfen für Senker Type 402 REPLACEABLE PILOT FOR CUTTER TYPE 402 Artikel-Nr. PART NO. 411-3/32" 411-1/8" 411-5/32" 411-3/16" 411-1/4" Andere Abmessungen und Winkel auf Anfrage / OTHER DIMENSION AND ANGLES ON REQUEST 63InhaltsverzeichnisIndex

Rückzug-Senker 100° BACK COUNTERSINK CUTTERS 100° HSS / HIGH SPEED STEEL H = Innenmaß H = PILOT HOLE 1/8" (3,18 mm) 3/32" (2,38 mm) 3/32" (2,38 mm) 1/8" (3,18 mm) 5/32" (3,97 mm) 1/8" (3,18 mm) 3/16" (4,76 mm) 5/32" (3,97 mm) 1/8" (3,18 mm) 3/16" (4,76 mm) 5/32" (3,97 mm) 5/32" (3,97 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 5/32" (3,97 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 5/16" (7,94 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 5/16" (7,94 mm) 1/4" (6,35 mm) 5/16" (7,94 mm) 3/8" (9,53 mm) 1/4" (6,35 mm) 5/16" (7,94 mm) 3/8" (9,53 mm) 5/16" (7,94 mm) 3/8" (9,53 mm) 1/2" (12,7 mm) 3/8" (9,53 mm) 1/2" (12,7 mm) D = Außenmaß D = BODY DIA 1/4" (6,35 mm) 1/4" (6,35 mm) 5/16" (7,94 mm) 5/16" (7,94 mm) 5/16" (7,94 mm) 3/8" (9,53 mm) 3/8" (9,53 mm) 3/8" (9,53 mm) 7/16" (11,11 mm) 7/16" (11,11 mm) 7/16" (11,11 mm) 1/2" (12,70 mm) 1/2" (12,70 mm) 1/2" (12,70 mm) 9/16" (14,29 mm) 9/16" (14,29 mm) 9/16" (14,29 mm) 5/8" (15,88 mm) 5/8" (15,88 mm) 5/8" (15,88 mm) 11/16" (17,46 mm) 11/16" (17,46 mm) 11/16" (17,46 mm) 3/4" (19,05 mm) 3/4" (19,05 mm) 3/4" (19,05 mm) 7/8" (22,23 mm) 7/8" (22,23 mm) 7/8" (22,23 mm) 1" (25,40 mm) 1" (25,40 mm) 1" (25,40 mm) 1.1/4" (31,75 mm) 1.1/4" (31,75 mm) Artikel-Nr. PART NO. 402A-4 402B-4 180-2J 402C-4 402D-4 180-3J 402E-4 402F-4 180-4J 402G-4 402H-4 180-5J 402I-4 402J-4 180-6J 402K-4 402L-4 180-7J 402M-4 402N-4 180-8J 402O-4 402P-4 402Q-4 402R-4 180-9L 180-10J 402S-4 402T-4 402U-4 402V-4 180-11L 402W-4 402X-4 Schneiden Flutes 4 4 3 4 4 3 4 4 3 4 4 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 BACK COUNTERSINK CUTTERS 100° Vollhartmetall (** HM-bestückt) SOLID CARBIDE(** CARBIDE TIPPED) Rückzug-Senker 100° 3-Schneiden / 3-FLUTES Artikel-Nr. PART NO. 181-1J 181-1K 181-2J 181-2 K 181-2 L 181-3J 181-3K 181-3L 181-4J 181-4K 181-4L 181-5J 181-5K 181-5L 181-6J 181-6K 181-6L 181-7J 181-7K 181-7L 181-8J 181-8K 181-8L 181-9J 181-9K 181-9L 181-10J 181-10K 181-10L 181-11J 181-11K ** 181-11L ** 181-12J ** 181-12K ** D = Außenmaß D = BODY DIA 1/4" (6,35 mm) 1/4" (6,35 mm) 5/16" (7,94 mm) 5/16" (7,94 mm) 5/16" (7,94 mm) 3/8" (9,53 mm) 3/8" (9,53 mm) 3/8" (9,53 mm) 7/16" (11,11 mm) 7/16" (11,11 mm) 7/16" (11,11 mm) 1/2" (12,70 mm) 1/2" (12,70 mm) 1/2" (12,70 mm) 9/16" (14,29 mm) 9/16" (14,29 mm) 9/16" (14,29 mm) 5/8" (15,88 mm) 5/8" (15,88 mm) 5/8" (15,88 mm) 11/16" (17,46 mm) 11/16" (17,46 mm) 11/16" (17,46 mm) 3/4" (19,05 mm) 3/4" (19,05 mm) 3/4" (19,05 mm) 7/8" (22,23 mm) 7/8" (22,23 mm) 7/8" (22,23 mm) 1" (25,40 mm) 1" (25,40 mm) 1" (25,40 mm) 1.1/4" (31,75 mm) 1.1/4" (31,75 mm) H = Innenmaß H = PILOT HOLE 3/32" (2,38 mm) 1/8" (3,18 mm) 3/32" (2,38 mm) 1/8" (3,18 mm) 5/32" (3,97 mm) 1/8" (3,18 mm) 5/32" (3,97 mm) 3/16" (4,76 mm) 1/8" (3,18 mm) 5/32" (3,97 mm) 3/16" (4,76 mm) 5/32" (3,97 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 5/32" (3,97 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 5/16" (7,94 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 5/16" (7,94 mm) 1/4" (6,35 mm) 5/16" (7,94 mm) 3/8" (9,53 mm) 1/4" (6,35 mm) 5/16" (7,94 mm) 3/8" (9,53 mm) 5/16" (7,94 mm) 3/8" (9,53 mm) 1/2" (12,7 mm) 3/8" (9,53 mm) 1/2" (12,7 mm) Andere Abmessungen und Winkel auf Anfrage / OTHER DIMENSION AND ANGLES ON REQUEST 65InhaltsverzeichnisIndex

Führungsstangen für Rückzug-Senker und Rückzug-Planfräser Serie 180 - 181 - 190 - 191 - 402 - 403 PILOTS FOR BACK COUNTERSINK CUTTERS & BACK SPOTFACER CUTTERS SERIES 180 - 181 - 190 - 191 - 402 - 403 Standard Führungsstangen / PLAIN PILOTS Artikel-Nr. PART NO. 185-1 185-2 185-3 P = Durchmesser P = PILOT DIA 3/32" (2,38 mm) 1/8" (3,18 mm) 5/32" (3,97 mm) Artikel-Nr. PART NO. 185-4 185-5 185-6 P = Durchmesser P = PILOT DIA 3/16" (4,76 mm) 1/4" (6,35 mm) 5/16" (7,94 mm) Artikel-Nr. PART NO. 185-7 185-8 P = Durchmesser P = PILOT DIA 3/8" (9,53 mm) 1/2" (12,7 mm) Abgesetzte Führungsstangen / STEP PILOTS PART NO. P1 Artikel-Nr. P2 3/32" (2,38 mm) 1/8" (3,18 mm) 186-1 1/8" (3,18 mm) 5/32" (3,97 mm) 186-2 5/32" (3,97 mm) 3/16" (4,76 mm) 186-3 3/16" (4,76 mm) 1/4" (6,35 mm) 186-4 1/4" (6,35 mm) 5/16" (7,94 mm) 186-5 5/32" (3,97 mm) 3/16" (4,76 mm) 186-6 3/16" (4,76 mm) 1/4" (6,35 mm) 186-7 1/4" (6,35 mm) 5/16" (7,94 mm) 186-8 5/16" (7,94 mm) 3/8" (9,53 mm) 186-9 3/8" (9,53 mm) 1/2" (12,7 mm) 3/4" - 7/8" - 1" 186-10 1/2" (12,7 mm) 9/16" (14,29 mm) 186-11 3/8" (9,53 mm) 1/2" (12,7 mm) 186-16 186-17 1/2" (12,7 mm) 9/16" (14,29 mm) 1" 1.1/8" - 1.1/4" 1.1/8" - 1.1/4" Nur geeignet für Fräserdurchmesser : ONLY FOR USE WITH CUTTER DIAMETER : 1/4" - 5/16" 1/4" - 5/16" - 3/8" - 7/16" 5/16" - 3/8" - 7/16" - 1/2" 3/8" - 7/16" - 1/2" 1/2" 9/16" 9/16" - 5/8" - 11/16" 9/16" - 5/8" - 11/16" - 3/4" 5/8" - 11/16" - 3/4" - 7/8" Andere Abmessungen auf Anfrage / OTHER DIMENSIONS ON REQUEST 67InhaltsverzeichnisIndex

HM-bestückte Lochsägen "GP Integral" Metrisch/Zoll CARBIDE TIPPED HOLE SAWS "GP INTEGRAL" METRIC/INCH Art.Nr. P/N CT16 CT17 CT18 CT19 CT20 CT21 CT22 CT23 CT24 CT25 CT26 CT27 CT28 CT29 CT30 CT31 CT32 CT33 CT34 CT35 CT36 CT37 CT38 CT39 CT40 CT41 CT42 CT43 CT44 CT45 CT46 CT47 CT48 CT49 CT50 D mm 16 d1 mm 10 d2 mm 15 d3 mm 6 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Ersatzbohrer für GP Integral Lochsägen REPLACEMENT DRILL FOR GP INTEGRAL HOLE SAWS Art.Nr. P/N CT51 CT52 CT53 CT54 CT55 CT56 CT57 CT58 CT59 CT60 CT61 CT62 CT63 CT64 CT65 CT66 CT67 CT68 CT69 CT70 CT71 CT72 CT73 CT74 CT75 CT76 CT77 CT78 CT79 CT80 CT85 CT90 CT95 CT100 Art.Nr. P/N PCT6 D mm 51 d1 mm 10 d2 mm 15 d3 mm 6 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 85 90 95 100 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Durchmesser DIA Länge LENGTH 6,35 mm 60 mm Andere Abmessungen auf Anfrage / OTHER DIMENSIONS ON REQUEST 69InhaltsverzeichnisIndex

Nenngröße / SIZE 3/32" (2,38 mm) 1/8" (3,18 mm) 5/32" (3,97 mm) #20 (4,09 mm) 3/16" (4,76 mm) #10 (4,91 mm) 7/32" (5,56 mm) 1/4" (6,35 mm) "F" (6,53 mm) 9/32" (7,14 mm) 5/16" (7,94 mm) 11/32" (8,73 mm) 3/8" (9,53 mm) 13/32" (10,32 mm) 7/16" (11,11 mm) 15/32" (11,91 mm) 1/2" (12,70 mm) 17/32" (13,49 mm) 9/16" (14,29 mm) 19/32" (15,08 mm) 5/8" (15,88 mm) 21/32" (16,67 mm) 11/16" (17,46 mm) 23/32" (18,26 mm) 3/4" (19,05 mm) Nenngröße / SIZE D .093 (2,36 mm) .124 (3,15 mm) .154 (3,91 mm) .159 (4,04 mm) .186 (4,72 mm) .1915 (4,86 mm) .2167 (5,50 mm) .248 (6,30 mm) .255 (6,48 mm) .279 (7,09 mm) .3105 (7,89 mm) .3415 (8,67 mm) .373 (9,47 mm) .404 (10,26 mm) .4355 (11,06 mm) .4665 (11,85 mm) .498 (12,65 mm) .529 (13,44 mm) .560 (14,22 mm) .591 (15,01 mm) .622 (15,80 mm) .653 (16,59 mm) .685 (17,40 mm) .716 (18,19 mm) .747 (18,97 mm) Führungszapfen für Senker Serie 488C REPLACEABLE PILOTS FOR CUTTER SERIES 488C Schaft / SHANK 3/32" (2,38 mm) 489A-1 489A-2 489A-3 489A-4 489A-5 489A-6 489A-7 489A-8 489A-9 489A-10 489A-11 Schaft / SHANK 1/8" (3,18 mm) 489B-2 489B-3 489B-4 489B-5 489B-6 489B-7 489B-8 489B-9 489B-10 489B-11 489B-12 489B-13 489B-14 489B-15 489B-16 489B-17 Schaft / SHANK 3/16" (4,76 mm) 489C-5 489C-6 489C-7 489C-8 489C-9 489C-10 489C-11 489C-12 489C-13 489C-14 489C-15 489C-16 489C-17 489C-18 489C-19 489C-20 489C-21 489C-22 489C-23 489C-24 489C-25 Führungszapfen für Senker Serie 850 REPLACEABLE PILOTS FOR CUTTER SERIES 850 D .093 (2,36 mm) .124 (3,15 mm) .154 (3,91 mm) .159 (4,04 mm) .186 (4,72 mm) .1915 (4,86 mm) .2167 (5,50 mm) .248 (6,30 mm) .255 (6,48 mm) .279 (7,09 mm) .3105 (7,89 mm) .3415 (8,67 mm) .373 (9,47 mm) .404 (10,26 mm) .4355 (11,06 mm) .4665 (11,85 mm) .498 (12,65 mm) .529 (13,44 mm) .560 (14,22 mm) .591 (15,01 mm) .622 (15,80 mm) 3/32" (2,38 mm) 1/8" (3,18 mm) 5/32" (3,97 mm) #20 (4,09 mm) 3/16" (4,76 mm) #10 (4,91 mm) 7/32" (5,56 mm) 1/4" (6,35 mm) "F" (6,53 mm) 9/32" (7,14 mm) 5/16" (7,94 mm) 11/32" (8,73 mm) 3/8" (9,53 mm) 13/32" (10,32 mm) 7/16" (11,11 mm) 15/32" (11,91 mm) 1/2" (12,70 mm) 17/32" (13,49 mm) 9/16" (14,29 mm) 19/32" (15,08 mm) 5/8" (15,88 mm) Andere Abmessungen auf Anfrage / OTHER DIMENSIONS ON REQUEST ! Schaft / SHANK 3/32" (2,38 mm) 855-1-3/32" 855-2-3/32" 855-3-3/32" 855-4-3/32" 855-5-3/32" 855-6-3/32" 855-7-3/32" 855-8-3/32" 855-9-3/32" Schaft / SHANK 1/8" (3,18 mm) 855-2-1/8" 855-3-1/8" 855-4-1/8" 855-5-1/8" 855-6-1/8" 855-7-1/8" 855-8-1/8" 855-9-1/8" 855-10-1/8" 855-11-1/8" Schaft / SHANK 3/16" (4,76 mm) 855-5-3/16" 855-6-3/16" 855-7-3/16" 855-8-3/16" 855-9-3/16" 855-10-3/16" 855-11-3/16" 855-12-3/16" 855-13-3/16" 855-14-3/16" 855-15-3/16" 855-16-3/16" 855-17-3/16" 855-18-3/16" 855-19-3/16" 855-20-3/16" 855-21-3/16" 71InhaltsverzeichnisIndex

COMPOSITE CUTTING TOOLS P.B.S. Diamond Plated Saw Blades Arbor Mounted 40/60 Grit – 1/8” Return Part Number Unslotted 49-SB1U 49-SB1-1/2U 49-SB2U 49-SB2-1/2U 49-SB3U 49-SB3-1/2U 49-SB4U 49-SB5U 49-SB6U 49-SB7U 49-SB8U 49-SB10U 49-SB12U 49-SB14U 49-SB16U 49-SB18U 49-SB20U 49-SB22U 49-SB24U 49-SB36U 49-SB48U Outside Diameter 1” (25 mm) 1-1/2” (38 mm) 2” (51 mm) 2-1/2” (64 mm) 3” (76 mm) 3-1/2” (89 mm) 4” (102 mm) 5” (127 mm) 6” (152 mm) 7” (178 mm) 8” (203 mm) 10” (25.4 cm) 12” (30.5 cm) 14” (35.6 cm) 16” (40.6 cm) 18” (45.7 cm) 20” (50.8 cm) 22” (55.9 cm) 24” (61.0 cm) 36” (91.4 cm) 48” (122.0 cm) Plated Thick- ness (Kerf) .060” to .080” .090” to .110” .120” to .130” .140” to .150” - - *Note: Please specify arbor diameter Mounted 40/60 Grit – 1/8” Return One-piece construction, 2-1/2” overall shank length Outside Diameter 3/4" (19 mm) 1” (25 mm) Part Number Unslotted 49-MS3/4U 49-MS1U 49-MS1-1/4U 1-1/4” (32 mm) 49-MS1-1/2U 1-1/2” (38 mm) 49-MS2U 49-MS2-1/2U 2-1/2” (64 mm) 49-MS3U 49-MS3-1/2U 3-1/2” (89 mm) 49-MS4U 49-MS4-1/2U 4-1/2” (114mm) 49-MS-5U 49-MS6U 5” (127 mm) 6” (152 mm) 2” (51 mm) 3” (76 mm) 4” (102 mm) Plated Thick- ness (Kerf) .80” to .100” .102” to .130” *Note: Please specify arbor diameter .130” to .150” Part Number Slotted 49-SB1S 49-SB1-1/2S 49-SB2S 49-SB2-1/2S 49-SB3S 49-SB3-1/2S 49-SB4S 49-SB5S 49-SB6S 49-SB7S 49-SB8S 49-SB10S 49-SB12S 49-SB14S 49-SB16S 49-SB18S 49-SB20S 49-SB22S 49-SB24S 49-SB36S 49-SB48S Part Number Slotted 49-MS3/4S 49-MS1S 49-MS1-1/4S 49-MS1-1/2S 49-MS2S 49-MS2-1/2S 49-MS3S 49-MS3-1/2S 49-MS4S 49-MS4-1/2S 49-MS5S 49-MS6S 75InhaltsverzeichnisIndex

Part No. Unfluted, Radius End * 49-R1UR 49-R2UR 49-R3UR 49-R4UR 49-R5UR 49-R6UR 49-R7UR 49-R8UR 49-R9UR 49-R10UR 49-R11UR 49-R12UR 49-R13UR 49-R14UR 49-R15UR 49-R16UR 49-R17UR 49-R18UR 49-R19UR 49-R20UR 49-R21UR 49-R22UR 49-R23UR 49-R24UR 49-R25UR 49-R26UR 49-R27UR 49-R28UR 49-R29UR 49-R30UR 49-R31UR 49-R32UR 49-R33UR 49-R34UR Diamond Plated Routers *Note: Please specify shank diameter. On 3/4” & larger outside diameter routers, minimum shank diameters is 1/2". Larger sizes are available on request. 40/60 Grit Part No. Fluted, Square End * - - 49-R3FS 49-R4FS 49-R5FS 49-R6FS 49-R7FS 49-R8FS 49-R9FS 49-R10FS 49-R11FS 49-R12FS 49-R13FS 49-R14FS 49-R15FS 49-R16FS 49-R17FS 49-R18FS 49-R19FS 49-R20FS 49-R21FS 49-R22FS 49-R23FS 49-R24FS 49-R25FS 49-R26FS 49-R27FS 49-R28FS 49-R29FS 49-R30FS 49-R31FS 49-R32FS 49-R33FS 49-R34FS Part No. Fluted, Radius End * - - 49-R3FR 49-R4FR 49-R5FR 49-R6FR 49-R7FR 49-R8FR 49-R9FR 49-R10FR 49-R11FR 49-R12FR 49-R13FR 49-R14FR 49-R15FR 49-R16FR 49-R17FR 49-R18FR 49-R19FR 49-R20FR 49-R21FR 49-R22FR 49-R23FR 49-R24FR 49-R25FR 49-R26FR 49-R27FR 49-R28FR 49-R29FR 49-R30FR 49-R31FR 49-R32FR 49-R33FR 49-R34FR Outside Dia. 1/8” (3.2 mm) 1/4” (6.35 mm) 3/8” (10 mm) 1/2” (13 mm) 5/8” (16 mm) 3/4" (19 mm) 1” (25 mm) 2” (51 mm) Head Length 1/4” (6.35 mm) 1/2” (13 mm) 1/4" (6.35 mm) 1/2" (13 mm) 3/4" (19 mm) 1” (25 mm) 1-1/2” (38 mm) 3/8” (10mm) 1/2" (13 mm) 3/4” (19mm) 1” (25 mm) 1-1/2” (38 mm) 1/2” (13 mm) 3/4" (19 mm) 1” (25 mm) 1-1/2” (38 mm) 2” (51 mm) 1/2” (13 mm) 3/4" (19 mm) 1” (25 mm) 1-1/2” (38 mm) 2” (51 mm) 1/2” (13 mm) 3/4" (19 mm) 1” (25 mm) 1-1/2” (38 mm) 2” (51 mm) 1/2” (13 mm) 3/4" (19 mm) 1” (25 mm) 1-1/2” (38 mm) 2” (51 mm) 1” (25 mm) 2” (51 mm) P.B.S. Diamond Plated Jigsaw Blades Part No. Unfluted, Square End * 49-R1US 49-R2US 49-R3US 49-R4US 49-R5US 49-R6US 49-R7US 49-R8US 49-R9US 49-R10US 49-R11US 49-R12US 49-R13US 49-R14US 49-R15US 49-R16US 49-R17US 49-R18US 49-R19US 49-R20US 49-R21US 49-R22US 49-R23US 49-R24US 49-R25US 49-R26US 49-R27US 49-R28US 49-R29US 49-R30US 49-R31US 49-R32US 49-R33US 49-R34US Fits Jug Saws Black & Decker & Competitive Rockwell Bayonet Rockwell Tiger & Competitive Overall Length 3” (76 mm) 3” (76 mm) 4” (102 mm) Part No. 49-300 49-301 49-303 Fits Jug Saws Black & Decker & Competitive Bosch Style Bosch Style Overall Length 4” (102 mm) 3” (76 mm) 4” (102 mm) Part No. 49-304 49-302 49-305 77InhaltsverzeichnisIndex

CARBIDE COMPOSITE TOOLING HIGH QUALITY TOOLS For use on Graphite, Kevlar, Fiberglass and many other composite materials DRILL REAMER - is used primarily on Fiberglass/Graphite materials. This 4 flute cutting tool drills & reams while holding extremely close tolerances Drill Size Part-No. Part-No. Part-No. Overall Length 3" Overall Length 4" Overall Length 6" .0980 .1250 .1285 .1406 .1562 .1590 .1610 .1719 .1875 .1910 .1935 .1990 .2010 .2031 .2188 .2280 .2340 .2380 .2500 .2510 DR-0980-3" DR-1250-3" DR-1285-3" DR-1406-3" DR-1562-3" DR-1590-3" DR-1610-3" DR-1719-3" DR-1875-3" DR-1910-3" DR-1935-3" DR-1990-3" DR-2010-3" DR-2031-3" DR-2188-3" DR-2280-3" DR-2340-3" DR-2380-3" DR-2500-3" DR-2510-3" DR-0980-4" DR-1250-4" DR-1285-4" DR-1406-4" DR-1562-4" DR-1590-4" DR-1610-4" DR-1719-4" DR-1875-4" DR-1910-4" DR-1935-4" DR-1990-4" DR-2010-4" DR-2031-4" DR-2188-4" DR-2280-4" DR-2340-4" DR-2380-4" DR-2500-4" DR-2510-4" DR-0980-6" DR-1250-6" DR-1285-6" DR-1406-6" DR-1562-6" DR-1590-6" DR-1610-6" DR-1719-6" DR-1875-6" DR-1910-6" DR-1935-6" DR-1990-6" DR-2010-6" DR-2031-6" DR-2188-6" DR-2280-6" DR-2340-6" DR-2380-6" DR-2500-6" DR-2510-6" DAGGER DRILL - an excellent tool for drilling Graphite/Epoxy Laminates. Can even be used in combination with aluminium. No back up required. Feeds and speeds recommendations available. Drill Size .1250 .1285 .1406 .1562 .1590 .1610 .1719 .1875 .1910 .1935 .1990 .2010 .2031 .2188 .2280 .2340 .2380 .2500 .2510 Part-No. Part-No. Overall Length 3" Overall Length 4" Overall Length 6" Part-No. DD-1250-3" DD-1285-3" DD-1406-3" DD-1562-3" DD-1590-3" DD-1610-3" DD-1719-3" DD-1875-3" DD-1910-3" DD-1935-3" DD-1990-3" DD-2010-3" DD-2031-3" DD-2188-3" DD-2280-3" DD-2340-3" DD-2380-3" DD-2500-3" DD-2510-3" DD-1250-4" DD-1285-4" DD-1406-4" DD-1562-4" DD-1590-4" DD-1610-4" DD-1719-4" DD-1875-4" DD-1910-4" DD-1935-4" DD-1990-4" DD-2010-4" DD-2031-4" DD-2188-4" DD-2280-4" DD-2340-4" DD-2380-4" DD-2500-4" DD-2510-4" DD-1250-6" DD-1285-6" DD-1406-6" DD-1562-6" DD-1590-6" DD-1610-6" DD-1719-6" DD-1875-6" DD-1910-6" DD-1935-6" DD-1990-6" DD-2010-6" DD-2031-6" DD-2188-6" DD-2280-6" DD-2340-6" DD-2380-6" DD-2500-6" DD-2510-6" Metrische Abmessungen auf Anfrage verfügbar / METRIC DIMENSIONS AVAILABLE ON REQUEST 79InhaltsverzeichnisIndex

PCD Spiral Drills PCD Wafer Tipped Spiral Drill, with improved flexible geometry can drill a wide range of CFRP/Stack materials. These drills are drilling more than 650 holes in 10mm material thickness. Part Number Diameter – Ø D Shank Ø d Cutting Length Overall Length INCHES TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ from 0.1250 to 0.1875 0.1875 (3/16”) from 0.1880 to 0.2500 0.250 (1/4”) from 0.2540 to 0.3125 0.3125 (5/16”) from 0.3130 to 0.3750 0.3750 (3/8”) from 0.3800 to 0.4375 0.4375 (7/16”) from 0.4380 to 0.5000 0.5000 (1/2”) P/N Sample with a Ø D of 0.1250: TSD-1250 MILLIMETERS 1.02 1.22 1.46 1.69 1.85 2.01 2.44 2.76 3.11 3.50 3.74 4.02 Shank Ø d Cutting Length 16 mm 3.0 mm Overall Length 46 mm Part Number Diameter – Ø D TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ TSD -_ _ _ _ 3.00 from 3.01 to 4.00 from 4.01 to 5.00 from 5.01 to 6.00 from 6.01 to 7.00 from 7.01 to 8.00 from 8.01 to 9.00 from 9.01 to 10.00 from 10.01 to 11.00 from 11.01 to 12.00 from 12.01 to 13.00 from 13.01 to 14.00 from 14.01 to 15.00 from 15.01 to 16.00 4.0 mm 5.0 mm 6.0 mm 7.0 mm 8.0 mm 9.0 mm 10.0 mm 11.0 mm 12.0 mm 13.0 mm 14.0 mm 15.0 mm 16.0 mm P/N Sample with a Ø D of 3.00 mm: TSD-0300 55 mm 62 mm 66 mm 74 mm 79 mm 84 mm 89 mm 95 mm 102 mm 102 mm 107 mm 111 mm 115 mm 22 mm 26 mm 28 mm 34 mm 37 mm 40 mm 43 mm 47 mm 51 mm 51 mm 54 mm 56 mm 58 mm Andere Abmessungen auf Anfrage / OTHER DIMENSIONS ON REQUEST 81InhaltsverzeichnisIndex

Hartmetall Frässtifte / CARBIDE BURRS A STANDARD CUT 4 STANDART CUTS ARE AVAILABLE FOR THE FOLLOWING CARBIDE BURR SHAPES Industry’s widest selection of Burr Shapes and Sizes becomes even more versatile, with a choice of four (4) flute styles for perfect mating of the tool to the job and material and you may choose any of these styles as “standard”. Super finished cutting edges give our burs the quality and remarkable long life you’ve been looking for: SPECIFICATIONS: End cuts have basic and intermediate flutes – no zero cutting. Where shank material is listed as “Carbide”, the tool is solid carbide, one-piece construction and should be used for heavy duty work whenever possible. Thank tolerances: + .0000 - .0005 B MEDIUM STARCUT C COARSE STARCUT D FINE STARCUT STANDARD CUT MEDIUM STARCUT COARSE STARCUT FINE STARCUT ALUMINIUM STARCUT SHANK SIZES: BURR SELECTION RECOMMENDATIONS: (A): Use for general purpose deburring of steel, cast iron and other ferrous metals… (B): Cross-fluted pattern produces a granular chip which induces improved control for portable hand (C): Recommended for dressing welds, snagging castings and machining non-ferrous metals, wood operations… and plastics…. (D): Recommended for applications where fine grinding and finish is a prerequisite… (SA): The milling cutter relief flute style provides fast and free ship removal soft Are designated for each burr… also available with 3M/M, 6M/M and 8M/M Shanks… “A” SHAPE (CYLINDRICAL) HEAD LENGTH SHANK DIA. 1/8 1/8 1/8 3/16 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/8 1/8 1/8 1/8 3/16 1/8 1/4 1/4 1/4 1/4 1/4 PART NO. A4 A10 A12 A14 A16 A18 A20 A22 A24 A26 A28 PART NO. B2 B4 B6 B8 B10 B12 B14 B16 B18 B20 B22 HEAD DIA. 1/16 3/32 1/8 3/16 1/4 1/4 1/4 3/8 1/2 5/8 3/4 1/16 3/32 1/8 3/16 1/4 1/4 1/4 3/8 1/2 5/8 3/4 3/8 9/16 5/8 5/8 1/2 3/16 5/8 3/4 1 1 1 3/8 3/8 5/8 1/2 5/8 1/2 5/8 3/4 1 1 1 “B” SHAPE (CYLINDRICAL – RADIUS END) HEAD DIA. HEAD LENGTH SHANK DIA. PART NO. HEAD DIA. HEAD LENGTH SHANK DIA. “C” SHAPE (POINTED TREE) C2 C4 C6 C8 C10 C12 C14 C16 C18 1/8 1/8 3/16 1/4 1/4 3/8 1/2 5/8 3/4 1/4 3/8 1/2 1/2 5/8 3/4 1 1 1 1/8 1/8 3/16 1/8 1/4 1/4 1/4 1/4 1/4 SHANK MAT CARBIDE CARBIDE CARBIDE CARBIDE STEEL STEEL CARBIDE STEEL STEEL STEEL STEEL SHANK MAT CARBIDE CARBIDE CARBIDE CARBIDE CARBIDE STEEL CARBIDE STEEL STEEL STEEL STEEL SHANK MAT CARBIDE CARBIDE CARBIDE STEEL CARBIDE STEEL STEEL STEEL STEEL END CUT NO YES YES NO NO YES NO NO NO NO NO END RAD 1/32 3/64 1/16 1/16 3/32 1/8 1/8 3/16 1/4 5/16 3/8 END CUT NO NO NO NO NO NO NO NO NO 83InhaltsverzeichnisIndex

Hartmetall Frässtifte / CARBIDE BURRS PART NO. HEAD DIA. “I” SHAPE (BALL) HEAD LENGTH SHANK DIA. I2 I6 I8 I10 I12 I14 I16 I18 I20 I22 1/16 3/32 1/8 3/16 1/4 1/4 3/8 1/2 5/8 3/4 .039 .072 1/8 3/16 1/4 1/4 3/8 1/2 5/8 3/4 1/8 1/8 1/8 3/16 1/8 1/4 1/4 1/4 1/4 1/4 PART NO. HEAD DIA. “J” SHAPE (OLIVE) HEAD LENGTH SHANK DIA. J2 J4 J6 J8 J10 J12 J14 J16 J18 1/8 1/8 3/16 1/4 1/4 3/8 1/2 5/8 3/4 3/16 3/16 1/4 3/8 3/8 5/8 3/4 1 1 1/8 1/8 3/16 1/8 1/4 1/4 1/4 1/4 1/4 SHANK MAT CARBIDE CARBIDE CARBIDE CARBIDE STEEL CARBIDE STEEL STEEL STEEL STEEL SHANK MAT CARBIDE CARBIDE CARBIDE STEEL CARBIDE STEEL STEEL STEEL STEEL END RAD .031 .047 1/16 3/32 1/8 1/8 3/16 1/4 5/16 3/8 END RAD 3/64 1/64 1/16 5/64 5/64 1/8 5/32 1/4 5/16 Is designed for Aluminum and non-ferrous material. Can be used in Air-Tool or Milling Machine. Excellent for heavy and medium stock removal of soft sticky material. ALUMINIUM STAR CUT HEAD DIA. HEAD LENGTH 3/8 1/2 5/8 3/4 3/4 1 1 1-1/4 PART NO. A22SA A24SA A26SA A28SA PART NO. H12SA H14SA H16SA H18SA PART NO. B16SA B18SA B20SA B22SA PART NO. F10SA F12SA F14SA F16SA PART NO. I-16SA I-18SA I-20SA I-22SA HEAD DIA. 3/8 1/2 5/8 3/4 PART NO. HEAD DIA. I-1 .039 I-3 .055 I-5 .072 E-1 .039 E-3 .055 E-5 .072 A-1 .039 A-3 .055 A-5 .072 L-1 .039 L-3 .055 L-5 .072 MINI CARBIDE BURRS WITH 3/32” CARBIDE SHANKS 85InhaltsverzeichnisIndex

Pneumatische Stabschleifer PNEUMATIC STRAIGHT DIE GRINDER 87InhaltsverzeichnisIndex

ZT3000I POSITIVE FEED DRILL Design and Features Characteristics Zephyr’s new ZT3000IA Inline Positive Feed Drill offers a high power to weight ratio in a compact modular design with ease of operation and maintenance in mind. In addition to its unique features, the ZT3000I offers a wider range of RPM’s and feed rates than any other tool in its class. One spindle size (1/2 in.) is used for the full range of RPM’s and feed rate configurations. All Parts of the New ZT3000I are interchangeable with the ZT3000A Capacity Aluminum 1.25” (31.75 mm) Steel .75” (19.05mm) Titanium .75” (19.05mm) Stroke Minimum .375” (9.525mm) Maximum unlimited RPM 200, 300, 450, 650, 900, 1800, 2800 and 4200 RPM Feed Rate .001, .002, .003, .004, .005, .006, .007 and .008 IPR Weight 8.0 lbs - 3.6 Kg Features: 1. 1.75 HP motor 2. Right Angle design for close quarter application 3. Designed for oil hole application 4. Spindle utilize 9/16-18 internal thread for standard thread shank drill (adapter for different thread sizes available) 5. One size spindle that can be used for the full range of RPM’s and feed rate configurations 6. Advance Air Logic System Right Angle Positive Feed Drill. To maximize accessibility, the air hose can be attached into one of the three inlet port locations on the air motor housing The air motor housing is easily adapted to any on–board coolant system, such as the Unist Mini-Back lubricators Pull to start/ push to stop Auto retract at the end of drilling cycle Auto shut off at the completion of the retract cycle The tool can start in either feed or the retract mode The spindle can be retracted at any given point during the feed cycle by depressing the retract button • • • • • • Rapid spindle retraction Modular Design 1. Air motor housing sub-assembly • • 2. Gear reducer sub-assembly • Modular designed gear reducers use fewer components while offering a wide range of RPM’s 3. Drill head module • • 4. Nose piece Index Mechanism • • 5. No adapter needed for standard 1-20 thread nosepiece Easy access simple to operate index lever Allows orientation of the tool around drill axis in 30º increments The drill head module can be configured to any of its standard feed rates by simply changing two gears Spindle guard sub-assembly can be quickly attached to either on-board coolant system or to any outside coolant system 89InhaltsverzeichnisIndex

Art.Nr./PART NO. 135DPV-7B-43 135DPV -14B-51 135DPV -28B-51 Art.Nr./PART NO. 135DPV-7B-50* 135DPV-14B-50* Support Handle Art.Nr./PART NO. 861006 Cleco Variable Speed Air Drills • Calibrated dial on rear of tool simplifies drill speed selection • Choice of three governed speed models to match material • Can be used with feed assist for accurate, perpendicular holes • Includes keyed chuck 3/8” Capaciy - 0.7 hp (0.52 kW) - Non-Reversible RPM (no load) RPM (governed) 600 1250 2600 150 - 550 400 - 1200 700 - 2400 Overall Length 9-5/8” (244 mm) 9-1/4” (235 mm) 8-1/2” (216 mm) Weight 3.625 lbs (1.6 kg) 3.375 lbs (1.5 kg) 3.125 lbs (1.4 kg) 1/2” Capaciy - 0.7 hp (0.52 kW) - Non-Reversible RPM (no load) RPM (governed) 600 1250 150 - 550 400 - 1200 Overall Length 9-5/8” (244 mm) 9-1/4” (235 mm) Weight 3.625 lbs (1.6 kg) 3.375 lbs (1.5 kg) Description * 135DPV Drills must be equipped with support handle (861006) if 1/2" (13mm) capacity chuck is specified. Boelube Lubricant • High-strength polar lubricating film reduces friction & heat generation. • Greatly improves tool life, surface finish & hole quality. • Superior lubricity when machining aluminum, titanium and inconel. • Non-corrosive, non-flammable, chemically stable, with no hazardous substance. Art.Nr./PART NO. Type Size 70200-00 70200-13 70200-40 70302-12 70307-12 70305-12 70104-04 70104-05 70104-07 70104-09 Solid Paste / Soft / Blue Paste / Medium / Blue Paste / Hard / Pink Liquid 14.5 Oz. Cartridge 1.6 Oz. Push Tube 3.5 Oz. Push Tube 12 Oz. Jar 12 Oz. Jar 12 Oz. Jar 1 Gallon Pail 5 Gallon Pail 15 Gallon Drum 55 Gallon Drum 91InhaltsverzeichnisIndex

Pneumatische Bohrmaschinen Pistolenform PNEUMATIC PISTOL GRIP DRILLS 3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 1/2"-20 1/2"-20 1/2"-20 1/2"-20 1/2"-20 1/2"-20 3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 1/2"-20 1/2"-20 3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 3/8"-24 1/2"-20 3/8"-24 1/2"-20 1/2"-20 1/2"-20 1/2"-20 1/2"-20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 15 26 26 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 10 10 33 33 30 30 30 30 30 30 30 30 30 30 30 30 30 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 5 5 15 15 14 14 14 14 14 14 14 14 14 14 14 14 14 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 75 75 81 81 80 80 80 80 80 80 80 80 80 80 80 80 80 5.8 6.3 5.8 6.3 5.8 6.3 6.6 7.3 7.3 7.8 7.3 7.8 6.3 6.3 6.3 6.3 6.3 8.8 8.8 7.1 7.6 7.1 7.6 7.1 7.6 7.9 8.6 9.1 8.6 9.1 8.6 9.1 145 160 145 160 145 160 170 185 185 200 185 200 160 160 160 160 160 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 224 1-1/32 224 1-1/32 180 195 180 195 180 195 200 220 230 220 230 220 230 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 2.3 2.3 2.3 1.00 1.00 1.00 6000 4000 2600 3/8 10 3/8 10 3/8 10 2.1 2.3 2.1 2.3 2.1 2.3 2.7 2.7 2.7 3.1 2.7 3.1 0.95 1.00 0.95 1.00 0.95 1.00 1.20 1.20 1.20 1.40 1.20 1.40 6000 6000 4000 4000 2600 2600 2600 1200 700 700 400 400 1/4 6 3/8 10 1/4 6 3/8 10 1/4 6 3/8 10 1/2 13 3/8 10 3/8 10 1/2 13 3/8 10 1/2 13 .60 hp (0.45 kw) - Non-Reversible SDR6P60N2 SDR6P60N3 SDR6P40N2 SDR6P40N3 SDR6P26N2 SDR6P26N3 SDR6P26N4 SDR6P12N3 SDR6P7N3 SDR6P7N4 SDR6P4N3 SDR6P4N4 .60 hp (0.45 kw) - Non-Reversible With Keyless Chuck SDR6P60NK3 SDR6P40NK3 SDR6P26NK3 .20 hp (0.15 kw) - Reversible 1412R 1410R 0.80 hp (0.60 kw) - Reversible 13 3P2340 3P2140 13 1 hp (0.75 kw) - Reversible 6 SDR10P40R2 10 SDR10P40R3 SDR10P25R2 6 10 SDR10P25R3 6 SDR10P20R2 10 SDR10P20R3 SDR10P20R4 13 10 SDR10P7R3 10 SDR10P7R4 10 SDR10P5R3 13 SDR10P5R4 SDR10P3R3 10 13 SDR10P3R4 4000 4000 2500 2500 2000 2000 2000 700 700 500 500 300 300 1.10 1.15 1.10 1.15 1.10 1.15 1.35 1.40 1.60 1.40 1.60 1.40 1.60 2.4 2.6 2.4 2.6 2.4 2.6 3.0 3.1 3.6 3.1 3.6 3.1 3.6 1/4 3/8 1/4 3/8 1/4 3/8 1/2 3/8 3/8 3/8 1/2 3/8 1/2 2600 2000 0.60 0.60 2.30 2.30 850 300 1.3 1.3 5.0 5.0 1/4 1/4 1/2 1/2 6 6 93InhaltsverzeichnisIndex

Pneumatische Winkelbohrmaschinen PNEUMATIC ANGLE DRILLS 2.7 1.3 305 12.0 5800 1.5 1.5 9.7 9.7 0.7 0.7 1.5 1.5 0.7 0.7 246 246 259 259 10.2 10.2 2800 2200 2800 2200 2800 2200 45˚ Angle Head - .33 hp (0.25 kw) - 1/4"-28 Internal Thread Spindle 1AM1541 1AM1441 45˚ Angle Head - .75 hp (0.56 kw) - 1/4"-28 Internal Thread Spindle 2A1410-45 90˚ Angle Head - .33 hp (0.25 kw) - 1/4"-28 Internal Thread Spindle 1AM1551B 1AM1451B 90˚ Angle Head - .33 hp (0.25 kw) - 9/32"-40 Internal Thread Spindle 1AM1552B 1AM1452B 90˚ Angle Head - .75 hp (0.56 kw) - 1/4"-28 Internal Thread Spindle 2A1410-AH 2A1510-AH 180˚ Rotating Head - .75 hp (0.56 kw) - Chuck Capacity: #70 thru 1/4" 2L1380 3350 Sealant Removal Tool Kit 1AM1141/51K 800 Includes 1AM1151 (90˚ Angle Drill) and 65213 (45 Deg Angle Drill Head Assembly) 1AM1141SRK Includes 1AM1141 (45˚ Angle Drill) 1AM1151SRK Includes 1AM1151 (90˚ Angle Drill) 5800 540 11.4 12.8 246 246 290 325 0.7 0.7 9.7 9.7 1.3 1.4 1.5 1.5 2.7 3.1 13.7 11.5 11.5 11.5 348 292 292 292 800 800 1.1 .80 .80 .80 1.8 2.3 1.8 1.8 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.6 0.3 0.3 0.3 75 75 85 75 75 75 75 85 85 85 75 75 75 8 8 8 8 8 8 8 8 8 15 8 8 8 12 12 28 12 12 12 12 28 28 28 12 12 12 6 6 13 6 6 6 6 13 13 13 6 6 6 95InhaltsverzeichnisIndex

TYP A Spannzangen COLLETS TYP B A Art.Nr./PART NO. B Art.Nr./PART NO. 2172 2182 2192 2202 2212 2222 2232 2242 2252 2262 2272 2282 2292 2302 2312 2322 2332 2342 2352 2362 2372 2382 2392 2402 2412 2422 2432 2442 2452 2462 2472 2482 2492 2502 2512 2522 2532 2542 2552 2562 2572 - - - - - - - - 18922 18932 18942 18952 18962 18972 18982 18992 19002 19022 19032 19042 - - - - - - - - - - - - - - - - - - - - - - - - 19052 19062 19072 19082 19092 19102 19122 19132 19142 19152 19162 19172 19182 Spannzangen Durchmesser COLLET DIAMETER 1.0 mm 1.1 mm 1.2 mm 1.3 mm 1.4 mm 1.5 mm 1.6 mm (1/16”) 1.7 mm 1.8 mm 1.9 mm 2.0 mm 2.1 mm 2.2 mm 2.3 mm 2.4 mm (3/32") 2.5 mm 2.6 mm 2.7 mm 2.8 mm 2.9 mm 3.0 mm 3.1 mm 3.2 mm (1/8") 3.3 mm 3.4 mm 3.5 mm 3.6 mm 3.7 mm 3.8 mm 3.9 mm 4.0 mm (5/32“) 4.1 mm 4.2 mm 4.3 mm 4.4 mm 4.5 mm 4.6 mm 4.7 mm 4.8 mm (3/16") 4.9 mm 5.0 mm 5.2 mm 5.4 mm 5.5 mm 5.6 mm 5.8 mm 6.0 mm 6.2 mm 6.4 mm 97InhaltsverzeichnisIndex

Offset drills for those "hard to get at" areas. Heat treated gears, Hardened and precision ground shafts, make this tool acceptable for the toughest jobs. Spindle Offset O Drill Offset X Overall Length L Length Short End L1 5/16“ 3-13/16“ 4-35/64“ 1-61/64“ Body Thick T 17/32“ Mount Dia. D 11/16“ 5/16“ 3-1/8“ 3-7/8“ 1-61/64“ 17/32“ 11/16“ Max.Rec. Cap. 1/4" 1/4" 1/4" 5/16“ 2-29/64“ 3-13/64“ 1-15/16“ 5/16“ 2-15/32“ 3-7/32“ 1-13/16“ 1/2“ 3/8“ 11/16“ 11/16“ 3/16“ The ZT561/ZT562/ZT563 series flat offset angle drills. Extra thin drills which allow access into tight areas. All steel housings, heat treated gears, hardened and precision ground shafts tackle the toughest of tasks with ease. Model ZT535-C ZT535-D ZT535-G ZT622-C ZT622-D ZT622-G ZT721-C ZT721-D ZT721-G ZT733-C ZT733-D ZT733-G Spindle Thread 1/4-28“ #10-32 #5-40 1/4-28“ #10-32 #5-40 1/4-28“ #10-32 #5-40 1/4-28“ #10-32 #5-40 Spindle Thread Spindle Offset O 10-32 9/32“ 1/4“-28 9/32“ Model ZT562 ZT563 ZT561 ZT762 ZT763 ZT761 ZT562C ZT563C ZT561C ZT762C ZT763C Drill Offset X 2.5/8“ 2.5/8“ 3.3/64“ 2.5/8“ 2.5/8“ 3.3/64“ 2.5/8“ 2.5/8“ 3.3/64“ 2.5/8“ 2.5/8“ Overall Length L 3.7/16“ 3.7/16“ 3.13/16 3.7/16“ 3.7/16“ 3.13/16“ 3.7/16“ 3.7/16“ 3.13/16 3.7/16“ 3.7/16“ Body Thick. T Body Width W ¼“ ¼“ 7/8“ 7/8“ Length L1 5.11/16“ 5.11/16“ 5.11/16“ 1.13/16“ 1.13/16“ 1.13/16“ 5.11/16“ 5.11/16“ 5.11/16“ 1.13/16“ 1.13/16“ Angle 30° R.H. 30° L.H. STRAIGHT 30° R.H. 30° L.H. STRAIGHT 30° R.H. 30° L.H. STRAIGHT 30° R.H. 30° L.H. Drill Cap. 1/8“ 1/8“ 99InhaltsverzeichnisIndex

DOUBLE MARGIN DRILLS - NAS 937 Jobber Length, Cobalt, 135° Split Point Designed for close tolerance drilling in titanium, stainless, heat treated material and aluminum alloys. When the drill point penetrates enough for the second margin to contact the wall of the hole, the point is stabilized and true cylindrical geometry is established. Smooth accurate holes are produced and reaming can often be eliminated. Drill Drill Diameter Part-No. 13-DM63 13-DM40 13-DM64 13-DM65 13-DM30 13-DM66 13-DM27 13-DM67 13-DM21 13-DM20 13-DM19 13-DM68 13-DM16 13-DM15 13-DM13 Drill Size 3/32" #40 7/64" 1/8" #30 9/64" #27 5/32" #21 #20 #19 11/64" #16 #15 #13 Flute Length 1-1/4" 1-3/8" 1-1/2" 1-5/8" 1-5/8" 1-3/4" 1-7/8" 2" 2-1/8" 2-1/8" 2-1/8" 2-1/8" 2-3/16" 2-3/16" 2-5/16" Overall Length 2-1/4" 2-3/8" 2-5/8" 2-3/4" 2-3/4" 2-7/8" 3" 3-1/8" 3-1/4" 3-1/4" 3-1/4" 3-1/4" 3-3/8" 3-3/8" 3-1/2" Part-No. 13-DM70A 13-DM69 13-DM12 13-DM11 13-DM10 13-DM08 13-DM06 13-DM05 13-DM71 13-DM93 13-DM73 13-DM95 13-DM96 13-DM77 13-DM81 Drill Size --- 3/16" #12 #11 #10 #8 #6 #5 7/32" D 1/4" F G 5/16" 3/8" Diameter .1870 .1875 .1890 .1910 .1935 .1990 .2040 .2055 .2188 .2460 .2500 .2570 .2610 .3125 .3750 Flute Length 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-7/16" 2-7/16" 2-1/2" 2-1/2" 2-1/2" 2-3/4" 2-3/4" 2-7/8" 2-7/8" 3-3/16" 3-5/8" Overall Length 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-5/8" 3-5/8" 3-3/4" 3-3/4" 3-3/4" 4" 4" 4-1/8" 4-1/8" 4-1/2" 5" .0938 .0980 .1094 .1250 .1285 .1406 .1440 .1562 .1590 .1610 .1660 .1719 .1770 .1800 .1850 PILOTED DOUBLE MARGIN DRILLS Jobber Length, Cobalt, 135° Split Point Designed for close tolerance drilling in titanium, stainless, heat treated material and aluminum alloys. When the drill point penetrates enough for the second margin to contact the wall of the hole, the point is stabilized and true cylindrical geometry is established. Smooth accurate holes are produced and reaming can often be eliminated. Drill Diameter Pilot Diameter Flute Length Overall Length Pilot Length 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 3/8" 3/8" 2-3/4" 3" 3-1/4" 3-1/4" 3-1/4" 3-1/4" 3-3/8" 3-3/8" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-5/8" 3-5/8" 3-5/8" 4" 4" 4" 4" 4" 4" 4-1/2" 5" 5" Part-No. 13-100 13-106 13-114 13-107 13-117 13-115 13-118 13-119 13-121 13-128 13-135 13-142 13-149 13-156 13-170 13-163 13-184 13-177 13-191 13-205 13-198 13-230 13-327 13-223 13-216 13-244 13-250 13-255 Size 30 x 40 27 x 40 21 x 40 21 x 30 20 x 40 20 x 30 16 x 40 16 x 30 13 x 40 13 x 30 13 x 21 12 x 40 12 x 30 12 x 21 11 x 30 11 x 21 10 x 40 10 x 30 10 x 21 D x 13 D x 3/16 1/4 x 30 1/4 x 21 1/4 x 11 1/4 x 10 5/16 x 1/4 3/8 x 1/4 3/8 x 5/16 .1285 .1440 .1590 .1590 .1610 .1610 .1770 .1770 .1850 .1850 .1850 .1890 .1890 .1890 .1910 .1910 .1935 .1935 .1935 .2460 .2460 .2500 .2500 .2500 .2500 .3125 .3750 .3750 .0980 .0980 .0980 .1285 .0980 .1285 .0980 .1285 .0980 .1285 .1590 .0980 .1285 .1590 .1285 .1590 .0980 .1285 .1590 .1850 .1875 .1285 .1590 .1910 .1935 .2500 .2500 .3125 1-5/8" 1-7/8" 2-1/8" 2-1/8" 2-1/8" 2-1/8" 2-3/16" 2-3/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-7/16" 2-7/16" 2-7/16" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 3-3/16" 3-5/8" 3-5/8" Andere Abmessungen auf Anfrage / OTHER DIMENSIONS ON REQUEST 101InhaltsverzeichnisIndex

HSS - Maschinenreibahlen mit Führung HSS - PILOTED CHUCKING REAMERS Part Number 44-510 99-703 31-217 44-550 44-560 99-704 30-394 31-218 44-600 44-610 99-705 44-620 99-706 30-409 33-630 44-630 99-707 34-116 44-640 99-708 31-603 44-650 99-709 44-660 99-710 99-719 99-711 99-720 99-712 99-721 99-713 99-722 99-714 99-723 99-715 99-724 99-716 99-725 99-726 99-727 99-728 99-729 99-730 99-731 Reamer Pilot Diameter / INCH Diameter / INCH .3125 .3225 .3230 .3251 .3281 .3380 .3390 .3390 .3407 .3438 .3535 .3594 .3700 .3710 .3750 .3750 .3850 .3860 .3906 .4005 .4010 .4062 .4160 .4219 .4325 .4375 .4485 .4531 .4640 .4688 .4795 .4844 .4950 .5000 .5110 .5156 .5265 .5312 .5469 .5625 .5781 .5938 .6094 .6250 .2969 .3075 .3100 .3090 .3125 .3225 .3230 .3350 .3251 .3281 .3380 .3438 .3535 .3550 .3494 .3594 .3700 .3720 .3750 .3850 .3860 .3906 .4005 .4062 .4160 .4219 .4325 .4375 .4405 .4531 .4640 .4688 .4795 .4844 .4950 .5000 .5110 .5156 .5312 .5469 .5625 .5781 .5938 .6094 Flutes Length 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-3/16" 1-1/8" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-3/4" No. 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 Pilot Length Overall Length 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 5/16" 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 7" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 9" 9" Andere Abmessungen auf Anfrage / OTHER DIMENSIONS ON REQUEST 103InhaltsverzeichnisIndex

COBALT AIRCRAFT DRILLS - WIRE GAUGE NUMBER SIZES - NAS907, Type J Cobalt Jobber Length Drill Cobalt HSS Surface Treated, 135° Split Point PART NUMBER 01-041 01-042 01-043 01-044 01-045 01-046 01-047 01-048 01-049 01-050 01-051 01-052 01-053 01-054 01-055 01-056 01-057 01-058 01-059 01-060 01-061 01-062 01-063 01-064 01-065 01-066 01-067 01-068 01-069 01-070 01-071 01-072 01-073 01-074 01-075 01-076 01-077 01-078 01-079 01-080 DIAMETER NUMBER 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 * 62 * 63 * 64 * 65 * 66 * 67 * 68 * 69 * 70 * 71 * 72 * 73 * 74 * 75 * 76 * 77 * 78 * 79 * 80 * * NON SPLIT POINT DECIMAL EQUIVALENT INCHES .0960 .0935 .0890 .0860 .0820 .0810 .0785 .0760 .0730 .0700 .0670 .0635 .0595 .0550 .0520 .0465 .0430 .0420 .0410 .0400 .0390 .0380 .0370 .0360 .0350 .0330 .0320 .0310 .0292 .0280 .0260 .0250 .0240 .0225 .0210 .0200 .0180 .0160 .0145 .0135 MILLIMETER EQUIVALENT 2.44 mm 2.37 mm 2.26 mm 2.18 mm 2.08 mm 2.06 mm 1.99 mm 1.93 mm 1.85 mm 1.78 mm 1.70 mm 1.61 mm 1.51 mm 1.40 mm 1.32 mm 1.18 mm 1.09 mm 1.07 mm 1.04 mm 1.02 mm 0.99 mm 0.97 mm 0.94 mm 0.91 mm 0.89 mm 0.84 mm 0.81 mm 0.79 mm 0.74 mm 0.71 mm 0.66 mm 0.64 mm 0.61 mm 0.57 mm 0.53 mm 0.51 mm 0.46 mm 0.41 mm 0.37 mm 0.34 mm FLUTE LENGTH INCHES 1-3/8 1-1/4 1-1/4 1-1/8 1-1/8 1-1/8 1 1 1 1 1 7/8 7/8 7/8 7/8 3/4 3/4 11/16 11/16 11/16 11/16 5/8 5/8 5/8 5/8 1/2 1/2 1/2 1/2 3/8 3/8 5/16 5/16 1/4 1/4 3/16 3/16 3/16 1/8 1/8 OVERALL LENGTH INCHES 2-3/8 2-1/4 2-1/4 2-1/8 2-1/8 2-1/8 2 2 2 2 2 1-7/8 1-7/8 1-7/8 1-7/8 1-3/4 1-3/4 1-5/8 1-5/8 1-5/8 1-5/8 1-1/2 1-1/2 1-1/2 1-1/2 1-3/8 1-3/8 1-3/8 1-3/8 1-1/4 1-1/4 1-1/8 1-1/8 1 1 7/8 7/8 7/8 3/4 3/4 105InhaltsverzeichnisIndex

COBALT AIRCRAFT DRILLS - LETTER SIZES - NAS907, Type J Cobalt Jobber Length Drill Cobalt HSS Surface Treated, 135° Split Point PART NUMBER DIAMETER SIZE 03-090 03-091 03-092 03-093 03-094 03-095 03-096 03-097 03-098 03-099 03-100 03-101 03-102 03-103 03-104 03-105 03-106 03-107 03-108 03-109 03-110 03-111 03-112 03-113 03-114 03-115 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z DECIMAL EQUIVALENT INCHES .234 .238 .242 .246 .250 .257 .261 .266 .272 .277 .281 .290 .295 .302 .316 .323 .332 .339 .348 .358 .368 .377 .386 .395 .404 .413 MILLIMETER EQUIVALENT 5.94 mm 6.05 mm 6.15 mm 6.25 mm 6.35 mm 6.53 mm 6.63 mm 6.76 mm 6.91 mm 7.04 mm 7.14 mm 7.37 mm 7.49 mm 7.67 mm 8.03 mm 8.20 mm 8.43 mm 8.61 mm 8.84 mm 9.09 mm 9.35 mm 9.58 mm 9.80 mm 10.03 mm 10.26 mm 10.49 mm FLUTE LENGTH INCHES 2-5/8 OVERALL LENGTH INCHES 3-7/8 2-3/4 2-3/4 2-3/4 2-3/4 2-7/8 2-7/8 2-7/8 2-7/8 2-7/8 2-15/16 2-15/16 3-1/16 3-1/16 3-3/16 3-5/16 3-7/16 3-7/16 3-1/2 3-1/2 3-5/8 3-5/8 3-3/4 3-3/4 3-7/8 3-7/8 4 4 4 4 4-1/8 4-1/8 4-1/8 4-1/8 4-1/8 4-1/4 4-1/4 4-3/8 4-3/8 4-1/2 4-5/8 4-3/4 4-3/4 4-7/8 4-7/8 5 5 5-1/8 5-1/8 5-1/4 5-1/4 107InhaltsverzeichnisIndex

COBALT AIRCRAFT EXTENSION DRILLS - FRACTIONAL SIZES / 6” OVERALL LENGTH - NAS907, Type J Cobalt Extension Length Drill Cobalt HSS Surface Treated, 135° Split Point DECIMAL EQUIVALENT INCHES PART NUMBER 04-100 04-101 04-102 04-103 04-104 04-105 04-106 04-107 04-108 04-109 04-110 04-111 04-112 04-125 04-114 04-116 04-115 04-121 04-120 04-124 04-113 04-118 04-119 04-126 04-117 DIAMETER INCHES 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 .0625 .0781 .0938 .1094 .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 .2656 .2812 .2969 .3125 .3281 .3438 .3594 .3750 .3906 .4062 .4219 .4375 COBALT AIRCRAFT EXTENSION DRILLS - LETTER SIZES / 6” OVERALL LENGTH - NAS907, Type J Cobalt Extension Length Drill Cobalt HSS Surface Treated, 135° Split Point PART NUMBER 06-408 06-403 06-402 06-401 06-412 06-404 06-405 06-409 06-410 06-411 06-406 06-407 DIAMETER SIZE C D F G H J K M N O Q U DECIMAL EQUIVALENT INCHES .2420 .2460 .2570 .2610 .2660 .2770 .2810 .2950 .3020 .3160 .3320 .3680 MILLIMETER EQUIVALENT 1.59 mm 1.98 mm 2.38 mm 2.78 mm 3.18 mm 3.57 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 6.75 mm 7.14 mm 7.54 mm 7.94 mm 8.33 mm 8.73 mm 9.13 mm 9.53 mm 9.92 mm 10.32 mm 10.72 mm 11.11 mm MILLIMETER EQUIVALENT 6.15 mm 6.25 mm 6.53 mm 6.63 mm 6.76 mm 7.04 mm 7.14 mm 7.49 mm 7.67 mm 8.03 mm 8.43 mm 9.35 mm FLUTE LENGTH INCHES 7/8 1 1-1/4 1-1/2 1-5/8 1-3/4 2 2-1/8 2-5/16 2-7/16 2-1/2 2-5/8 2-3/4 2-7/8 2-15/16 3-1/16 3-3/16 3-5/16 3-7/16 3-1/2 3-5/8 3-3/4 3-7/8 3-15/16 3-1/16 FLUTE LENGTH INCHES 2-3/4 2-3/4 2-7/8 2-7/8 2-7/8 2-7/8 2-15/16 3-1/16 3-1/16 3-1/16 3-7/16 3-5/8 OVERALL LENGTH INCHES 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” OVERALL LENGTH INCHES 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 6” 109InhaltsverzeichnisIndex

COBALT AIRCRAFT EXTENSION DRILLS - FRACTIONAL SIZES / 12” OVERALL LENGTH - NAS907, Type J Cobalt Extension Length Drill Cobalt HSS Surface Treated, 135° Split Point DIAMETER INCHES DECIMAL EQUIVALENT INCHES MILLIMETER EQUIVALENT FLUTE LENGTH INCHES 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 31/64 1/2 .0625 .0781 .0938 .1094 .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 .2812 .2969 .3125 .3281 .3438 .3594 .3750 .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000 1.59 mm 1.98 mm 2.38 mm 2.78 mm 3.18 mm 3.57 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 7.14 mm 7.54 mm 7.94 mm 8.33 mm 8.73 mm 9.13 mm 9.53 mm 9.92 mm 10.32 mm 10.72 mm 11.11 mm 11.51 mm 11.91 mm 12.30 mm 12.70 mm 7/8 1 1-1/4 1-1/2 1-5/8 1-3/4 2 2-1/8 2-5/16 2-7/16 2-1/2 2-5/8 2-3/4 2-15/16 3-1/16 3-1/16 3-5/16 3-7/16 3-1/2 3-5/8 3-3/4 3-7/8 3-15/16 3-1/16 4-3/16 4-5/16 4-3/8 4-1/2 OVERALL LENGTH INCHES 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” 12” PART NUMBER 06-300 06-301 06-302 06-303 06-304 06-305 06-306 06-307 06-308 06-309 06-310 06-311 06-312 06-316 06-317 06-313 06-326 06-321 06-322 06-314 06-327 06-320 06-324 06-318 06-328 06-315 06-329 06-319 111InhaltsverzeichnisIndex

THREADED SHANK ADAPTER DRILLS COBALT - NAS965D 1/4-28 Thread - FRACTIONAL SIZES - SIZE 1/8 5/32 3/16 7/32 1/4 5/16 3/8 DECIMAL EQUIVALENT INCES .1250 .1562 .1875 .2188 .2500 .3125 .3750 MILLIMETER EQUIVALENT 3.17 mm 3.97 mm 4.76 mm 5.56 mm 6.35 mm 7.94 mm 9.52 mm SHORT SERIES LENGTH 1 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 COBALT - NAS965D 1/4-28 Thread - LETTER SIZES - SIZE C D F G H J K L M N O DECIMAL EQUIVALENT INCES .2420 .2460 .2570 .2610 .2660 .2770 .2810 .2900 .2950 .3020 .3160 MILLIMETER EQUIVALENT SHORT SERIES LENGTH 6.15 mm 6.25 mm 6.53 mm 6.63 mm 6.75 mm 7.03 mm 7.14 mm 7.37 mm 7.49 mm 7.67 mm 8.03 mm 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 1-1/4 COBALT - NAS965D 1/4-28 Thread - VERY STUBBY / EXTRA LONG - PART NUMBER 11-105 11-107 11-109 11-111 11-113 11-117 11-121 PART NUMBER 12-103 12-104 12-106 12-107 12-108 12-110 12-111 12-112 12-113 12-114 12-115 LONG SERIES LENGTH 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 LONG SERIES LENGTH 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 2-1/8 STUBBY SERIES LENGTH 1/2 9/16 9/16 5/8 5/8 5/8 3/4 STUBBY SERIES LENGTH 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 PART NUMBER 11-205 11-207 11-209 11-211 11-213 11-217 11-221 PART NUMBER 12-203 12-204 12-206 12-207 12-208 12-210 12-211 12-212 12-213 12-214 12-215 PART NUMBER 11-305 11-307 11-309 11-311 11-313 11-317 11-321 PART NUMBER 12-303 12-304 12-306 12-307 12-308 12-310 12-311 12-312 12-313 12-314 12-315 SIZE # 50 # 40 # 30 # 27 # 21 # 20 # 16 # 13 # 12 # 11 # 10 # 8 # 5 1/4 DECIMAL EQUIVALENT INCES .0700 .0980 .1285 .1440 .1590 .1610 .1770 .1850 .1890 .1910 .1935 .1990 .2055 .2500 MILLIMETER EQUIVALENT VERY STUBBY LENGTH PART NUMBER EXTRA LONG LENGTH PART NUMBER 1.78 mm 2.49 mm 3.26 mm 3.66 mm 4.04 mm 4.09 mm 4.50 mm 4.70 mm 4.80 mm 4.85 mm 4.92 mm 5.06 mm 5.22 mm 6.35 mm 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 10-450 10-440 10-430 10-427 10-421 10-420 10-416 10-413 10-412 10-411 10-410 10-408 10-405 11-413 -- 2-1/2 2-3/4 3 3 3 3 3 3 3 3 3 3 3 -- 10-140 10-130 10-127 10-121 10-120 10-116 10-113 10-112 10-111 10-110 10-108 10-105 10-150 OTHER LENGTHS AND THREAD SIZES AVAILABLE ON REQUEST 113InhaltsverzeichnisIndex

115InhaltsverzeichnisIndex

117InhaltsverzeichnisIndex

Entgratwerkzeuge BURRAWAY TOOLS Standard Ersatzmesser REPLACEMENT BLADES Ersatzmesser Nr. REPLACEMENT BLADE NO. CTP-1 CTP-1 CTP-1 CTP-1 CTP-1 CTP-1 CTP-1 CTP-1 CTP-1 CTP-2 CTP-2 CTP-2 CTP-2 CTP-2 CTP-2 CTP-2 CTP-3 CTP-3 CTP-3 CTP-3 CTP-3 CTP-3 Bohrungsmaß HOLE SIZE .2165" .2188" .2344" .2362" .2500" .2559" .2656" .2756" .2812" .2953" .2969" .3125" .3150" .3281" .3346" .3438" .3543" .3594" .3740" .3750" .3906" .3937" Maß/DIM. A Maß/DIM. 7/32" (5,56 mm) to 3/4" (19,05 mm) B .87" (22,1 mm) .87" (22,1 mm) .87" (22,1 mm) .87" (22,1 mm) .87" (22,1 mm) .87" (22,1 mm) .87" (22,1 mm) .87" (22,1 mm) .87" (22,1 mm) .96" (24,4 mm) .96" (24,4 mm) .96" (24,4 mm) .96" (24,4 mm) .96" (24,4 mm) .96" (24,4 mm) .96" (24,4 mm) 1.00" (25,4 mm) 1.00" (25,4 mm) 1.00" (25,4 mm) 1.00" (25,4 mm) 1.00" (25,4 mm) 1.00" (25,4 mm) 5,50 mm 4.1/2" (114,3 mm) 5,56 mm 4.1/2" (114,3 mm) 5,95 mm 4.1/2" (114,3 mm) 6,00 mm 4.1/2" (114,3 mm) 6,35 mm 4.1/2" (114,3 mm) 6,50 mm 4.1/2" (114,3 mm) 6,75 mm 4.1/2" (114,3 mm) 7,00 mm 4.1/2" (114,3 mm) 7,14 mm 4.1/2" (114,3 mm) 7,50 mm 4.1/2" (114,3 mm) 7,54 mm 4.1/2" (114,3 mm) 7,94 mm 4.1/2" (114,3 mm) 8,00 mm 4.1/2" (114,3 mm) 8,33 mm 4.1/2" (114,3 mm) 8,50 mm 4.1/2" (114,3 mm) 8,73 mm 4.1/2" (114,3 mm) 9,00 mm 5" (127,0 mm) 9,13 mm 5" (127,0 mm) 9,50 mm 5" (127,0 mm) 9,53 mm 5" (127,0 mm) 9,92 mm 5" (127,0 mm) 10,00 mm 5" (127,0 mm) 7/32" 15/64" 1/4" 17/64" 9/32" 19/64" 5/16" 21/64" 11/32" 23/64" 3/8" 25/64" Type B Artikel Nr. PART NO. CTP-216 CTP-218 CTP-234 CTP-236 CTP-250 CTP-255 CTP-265 CTP-275 CTP-281 CTP-295 CTP-296 CTP-312 CTP-315 CTP-328 CTP-334 CTP-343 CTP-354 CTP-359 CTP-374 CTP-375 CTP-390 CTP-393 Andere Abmessungen auf Anfrage / OTHER DIMENSIONS ON REQUEST 119InhaltsverzeichnisIndex

HI-TORQUE DRIVER Ersatzschraube/Replacement Screw: Button Head Cap Screw 8-32 x 1/4" 121InhaltsverzeichnisIndex

5/16" HEX SHANK Artikel Nr. PART NO. D1231AA D1232AA D1233AA D1234AA D1234AA-15 Größe POINT SIZE 1 2 3 4 4 5/16" HEX SHANK Artikel Nr. PART NO. D1231AA-R D1232AA-R D1233AA-R Größe POINT SIZE 1 2 3 1/4" HEX SHANK PHILLIPS INSERT BITS Gesamtlänge OVERALL LENGTH 1.1/4" (31,8 mm) 1.1/4" (31,8 mm) 1.1/4" (31,8 mm) 1.1/4" (31,8 mm) 1.1/2" (38,1 mm) Körperdurchmesser BODY DIAMETER ACR - PHILLIPS INSERT BITS WITH REMOVAL-RIPS Gesamtlänge OVERALL LENGTH 1.1/4" (31,8 mm) 1.1/4" (31,8 mm) 1.1/4" (31,8 mm) PHILLIPS POWER BITS Körperdurchmesser BODY DIAMETER Artikel Nr. PART NO. E1101AA E1102AA E1103AA E1101AA-275 E1102AA-275 E1103AA-275 E1101AA-35 E1102AA-35 E1103AA-35 E1101AA-6 E1102AA-6 E1103AA-6 Größe POINT SIZE 1 2 3 1 2 3 1 2 3 1 2 3 Gesamtlänge OVERALL LENGTH 1.15/16" (49,2 mm) 1.15/16" (49,2 mm) 1.15/16" (49,2 mm) 2.3/4" (69,9 mm) 2.3/4" (69,9 mm) 2.3/4" (69,9 mm) 3" (76,2 mm) 3" (76,2 mm) 3" (76,2 mm) 6" (152,4 mm) 6" (152,4 mm) 6" (152,4 mm) Körperdurchmesser BODY DIAMETER 3/16" (4,76 mm) 1/4" (6,35 mm) 1/4" (6,35 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 1/4" (6,35 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 1/4" (6,35 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 1/4" (6,35 mm) 1/4" HEX SHANK ACR - PHILLIPS POWER BITS WITH REMOVAL-RIPS Artikel Nr. PART NO. E1101AA-R E1102AA-R E1103AA-R E1101AA-275-R E1102AA-275-R E1103AA-275-R E1101AA-35-R E1102AA-35-R E1103AA-35-R E1101AA-6-R E1102AA-6-R E1103AA-6-R Größe POINT SIZE 1 2 3 1 2 3 1 2 3 1 2 3 Gesamtlänge OVERALL LENGTH 1.15/16" (49,2 mm) 1.15/16" (49,2 mm) 1.15/16" (49,2 mm) 2.3/4" (69,9 mm) 2.3/4" (69,9 mm) 2.3/4" (69,9 mm) 3.1/2" (88,9 mm) 3.1/2" (88,9 mm) 3.1/2" (88,9 mm) 6" (152,4 mm) 6" (152,4 mm) 6" (152,4 mm) Körperdurchmesser BODY DIAMETER 3/16" (4,76 mm) 1/4" (6,35 mm) 1/4" (6,35 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 1/4" (6,35 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 1/4" (6,35 mm) 3/16" (4,76 mm) 1/4" (6,35 mm) 1/4" (6,35 mm) 123InhaltsverzeichnisIndex

1/4" HEX SHANK SLOTTED POWER BITS REDUCED SHANK DIAMETER Blatt-Weite ca. BLADE WIDTH APPR. .122" (3,10 mm) .154" (3,91 mm) .188" (4,78 mm) .250" (6,35 mm) .250" (6,35 mm) .188" (4,78 mm) .250" (6,35 mm) .250" (6,35 mm) .122" (3,10 mm) .154" (3,91 mm) .188" (4,78 mm) .250" (6,35 mm) .250" (6,35 mm) Blatt-Stärke ca. BLADE THICKNESS APPR. .022" (0,56 mm) .030" (0,76 mm) .034" (0,86 mm) .036" (0,91 mm) .038" (0,97 mm) .034" (0,86 mm) .036" (0,91 mm) .038" (0,97 mm) .022" (0,56 mm) .030" (0,76 mm) .034" (0,86 mm) .036" (0,91 mm) .038" (0,97 mm) Gesamtlänge OVERALL LENGTH 1.15/16" (49,2 mm) 1.15/16" (49,2 mm) 1.15/16" (49,2 mm) 1.15/16" (49,2 mm) 1.15/16" (49,2 mm) 2.3/4" (69,9 mm) 2.3/4" (69,9 mm) 2.3/4" (69,9 mm) 3" (76,2 mm) 3" (76,2 mm) 3" (76,2 mm) 3" (76,2 mm) 3" (76,2 mm) Schraubengröße SCREW SIZE 1F-2R 3F-4R 4F-5R 5F-6R 6F-8R 4F-5R 5F-6R 6F-8R 1F-2R 3F-4R 4F-5R 5F-6R 6F-8R FRENCH RECESS INSERT BITS Größe POINT SIZE 4 5 6 8 Gesamtlänge OVERALL LENGTH 1" (25,4 mm) 1" (25,4 mm) 1" (25,4 mm) 1" (25,4 mm) Körperdurchmesser BODY DIAMETER FRENCH RECESS INSERT BITS Körperdurchmesser BODY DIAMETER Gesamtlänge OVERALL LENGTH 1.1/4" (31,8 mm) 1.1/4" (31,8 mm) Größe POINT SIZE 6 8 MORTORQ SPIRAL DRIVE INSERT BITS Größe POINT SIZE 00 0 1 2 3 Gesamtlänge OVERALL LENGTH 1" (25,4 mm) 1" (25,4 mm) 1" (25,4 mm) 1" (25,4 mm) 1" (25,4 mm) Sechskantschaft HEX SHANK 1/4" 1/4" 1/4" 1/4" 5/16" MORTORQ SPIRAL POWER BITS Größe POINT SIZE 0 1 2 3 4 5 Gesamtlänge OVERALL LENGTH 1.15/16" (49,2 mm) 1.15/16" (49,2 mm) 1.15/16" (49,2 mm) 3.1/2" (88,9 mm) 3.1/2" (88,9 mm) 3.1/2" (88,9 mm) Sechskantschaft HEX SHANK 1/4" 1/4" 1/4" 7/16" 7/16" 5/8" 1/4" HEX SHANK 5/16" HEX SHANK Artikel Nr. PART NO. E3098A E3100A E3101A E3102A E3103A E3101A275 E3102A275 E3103A275 E3098A3 E3100A3 E3101A3 E3102A3 E3103A3 Artikel Nr. PART NO. H7224AA H7225AA H7226AA H7228AA Artikel Nr. PART NO. H7326AA H7328AA Artikel Nr. PART NO. ZMT-00 ZMT-0 ZMT-1 ZMT-2 Z5MT-3 Artikel Nr. PART NO. ZMTP-0 ZMTP-1 ZMTP-2 Z7MTP-3 Z7MTP-4 Z10MTP-5 125InhaltsverzeichnisIndex