English

Deutsch
English

Anfragekorb 0 Artikel Artikel (leer)

Keine Artikel in der Liste

Products
Cleco Fastening & Clamping Tools
Cleco Fasteners
Cleco Clamps
Cleco Installation Tools
Squeeze Action Clamps
Hand Tools
Nut Plate Jigs
Deburring Tools
Hand Rivet Pullers
Rivet Accessories for Hand Rivet Squeezer
Hi-Lok Tools / Ratchets
Hole Finders
HALO Drill Position Targeting System
Precision Measuring
Countersink Gages
Cable Tensiometer
Screwdriving Tools / Bits
Bits
HI-TORQUE DRIVER
Phillips Bits
Slotted Bits
French Recess Insert Bits
MorTorq Spiral Drive Insert Bit
Socket Head (Allen) Insert Bits
Square Recess Insert Bit
SPANNER TAMPER RESISTANT
TORX INSERT BITS
Torq-Set Bits
Tri-Wing Insert Bits
Hand Bit Holder
Accessories
Safety Wire and Pliers
Squeeze Action Clamps
Miscellaneous
Inspection Mirrors
Rivet Cutters
Semco Sealant Guns
Air Hose Assemblies
Sealant Gun Retainers
Standart Nozzles
DISPOSABLE PLASTIC CARTRIDGES, PLUNGERS & CAPS
APPLICATION / REMOVAL TOOLS & ACCESSORIES
INstalling and Removal TOlls for Electrical Connector Contacts
Flaring Tools 37°
Slimsert - Hand Inserting Tools
Hi-Lok / Hi-Lite Tools
HI-LOK HEX KEYS
Tight Squeeze Hand Too
Pin Protrusion Gauges
HI-LOK HAND INSTALLATION TOOLS
HI-LOK QUICK CHANGE REMOVAL HAND ASSEMBL
HI-LOK-COLLAR QUICK CHANGE SOCKET REMOVAL SYSTEM
HI-LOK INSTALLATION TOOL KIT
HI-LOK REMOVAL TOOL KIT
HI-LOK INSTALLATION & REMOVAL TOOL KIT
HI-LOK COLLAR REMOVAL TOOLS
HI-LOK / HI-LITE INSTALLATION TOOLS WITH TORQUE CONTROL
Hi-Lok Installation Tools
Riveting
Rivet Squeezers
Rivet Guns
Rivet Guns & Blind Rivet Installation Tools
Shavers & Accessories
Bucking Bars
Rivet Accessories
Cutting & Drilling
Microstop Countersink Cages & Accessories
Microstop Countersink Cages without Swivel Shaft
ZT330 (up to 3000 RPM)
Skirts
Inserts
444 (up to 10000 RPM)
Skirts
Inserts
ZT680 (up to 10000 UPM)
Accessories
432 & 463 (Jumbo Size)
ZT331 (up to 3000 RPM)
Skirts
Inserts
ZT334 (up to 3000 RPM)
Skirts
Inserts
ZT691 & ZT692 (up to 6000 RPM)
Microstop Countersink Cages with Swivel Shaft
ZT680SW
EH356HP (up to 6000 RPM)
ZT666 / ZT667 / ZT668
ZT666 (Thread M6x1)
ZT667 (Thread M8x1)
ZT668 (Thread 1/4"-28)
Inserts
Skirts
Drill Bits
Drill Bit Accessories
Drill Stop
Drill Bushings
Punch Type Strap Duplicators
SOLID CARBIDE DRILL
COMPOSITE CUTTING TOOLS
Nutplate Countersink Drill
Cobalt Rivet Knockout Drills
DOUBLE MARGIN DRILL NAS 937
COBALT AIRCRAFT DRILLS
Threaded Shank Adapter Drills
Deburring Tools
Cutters
Back Spot Facer Cutter
Honeycomb Cutters
CARBIDE BURRS
Taper Router, 3 Flutes
Hole Finders
Pneumatic Tools
Reamers
Piloted Reamers with Straight Shank
Piloted Reamers with Threaded Shank
Other
Tube/Pipe End-Finishing Maschines
Sanding Discs & Accessories
Cut Fluid and Lubricants
COMPOSITE CUTTING TOOLS
Boelube Lubricant
Countersink Cutters
Countersink Cutters with Thread
HSS 100°
1/4"-28 thread
Cobalt 100°
2 Flutes with solid pilot
3 Flutes with solid pilot
2 Fluites replaceable pilots
Carbide Tipped 100°
Countersinks with replaceable pilots
Countersinks with solid pilot
Hi-Lok Cobalt 100°/60°
Kevlar Counterinks 100°
Composite Countersink Cutters 100°
DAN5109 Countersink Cutters 100°, Carbide Tipped
Briles Countersink Cutter
Solid Carbide 100°
Countersinks with replaceable pilots
Countersinks with solid pilot
Accessoires for Countersink Cutters
Holder with internal thread
Carbide Tipped 130°
Countersink Cutters with Shank
HSSCo - STRAIGHT SHANK COUNTERSINK CUTTERS - 100°
100° SOLID CARBIDE STRAIGHT SHANK COUNTERSINKS
100° MINIATURE-STOP-COUNTERSINK CUTTER
REPLACEABLE PILOT FOR CUTTER TYPE 402
Back Countersink Cutter 100°
COUNTERBORES WITH STRAIGHT SHANK
REPLACEABLE PILOTS FOR CUTTER SERIES 488C
REPLACEABLE PILOTS FOR CUTTER SERIES 85
CARBIDE TIPPED STOP COUNTERBORES
Accessories
Hole Saws
HSS-HOLLOW-CUTTERS WITH THREADED SHANK 1/4"-28
HSS-HOLE SAWS WITH COARSE TOOTH
HOLE SAW ARBOR FOR SERIE 474
CARBIDE TIPPED HOLE SAWS
Offset Angle Drills
Rivet Hole Brush
Pneumatic Tools & Accessories
Drills
Accessories
COLLETS
Typ A
Typ B
Replacement Roll for Trim Shear EC-7
Rivet Squeezer
C-Type Compression Riveter
Alligator-Type Compression Riveter
Pneumatic Tools
Pneum. Trim Shears
Rivet Guns
PNEUMATIC & HAND NIBBLER
Cable Swaging Tools
Swaged Cable Terminal Pull Tester Kit
Portable Swaging Machine Kit
Other Tools
Catalogue
Sheet Catalogue
PDF-Catalogue
Our Team
About Us

Menü / Übersicht

Home
Catalogues & Brochure
+
Pneumatic Tools & Accessories
+
Hand Tools
+
Riveting
+
Cutting & Drilling
+
Cleco Fastening & Clamping Tools
Our Team
about us
Terms of Service
Privacy Statement
Imprint

> Cutting & Drilling>Countersink Cutters>Countersink Cutters with Thread>Solid Carbide 100° >Countersinks with solid pilot>157-2SC-5/16" (157A-2SC-100-.3125)

157-2SC-5/16" (157A-2SC-100-.3125)

View larger

157-2SC-5/16" (157A-2SC-100-.3125)

Reference: 157-2SC-5/16" (157A-2SC-100-.312

Solid carbide countersink cutter 100°

This product is no longer in stock

Warning: Last items in stock!

Availability date:

Menge:

Print

25 other products in the same category:

151-2SC-100...
151-2SC-100...
151-2SC-100...
151-2SC-100...
151-2SC-100...
152-2SC-100...
152-2SC-100...
152-2SC-100...
152-2SC-100...
152-2SC-100...
152-2SC-100...
152-2SC-100...
152-2SC-100...
152-2SC-100...
152-2SC-100...
153-2SC-100...
153-2SC-100...
151-2SC-100...
157-2SC-1/4...
157-2SC-3/8...
157-2SC-7/1...
157-2SC-1/2...
151-2SC-100...
153-2SC-100...
156-2SC-100...

Newsletter

Facebook

Follow us

Categories

Pneumatic Tools & Accessories
Hand Tools
Riveting
Cutting & Drilling
Cleco Fastening & Clamping Tools
Brands

Information

Contact
Terms of Service
Privacy Statement
Imprint
Sitemap

My account

My addresses
My personal info
Meine Anfragen

Store Information

Edgar Hausmann GmbH
Foerster-Busch-Str. 10
34346 Hann. Muenden Germany
USt. ID: DE 263 035 528
St.-Nr.: 20/220/02460
Call us now: +49 (0)5545 91030
Email: info@hausmann.aero