Mehr Infos
- 1 FlapSpeed PRO
- 1 Magnifier 10X
- 1 Screwdriver
- 1 Vice Grip
- 100 Almen strips
- 10 Flaps (9/16×1 1/4)
- 1 mandrel for 9/16×1 1/4 flaps
- 1 magnetic block
- 1 TSP-3B Almen Gage
- Both the straight handpiece and 90 degree handpiece
FlapSpeed® PRO – 1/5 – Introduction, Features and Connections – video
FlapSpeed® PRO – 2/5 – Operation – video
FlapSpeed® PRO – 3/5 – Flapper Peening Technique – video
FlapSpeed® PRO – 4/5 – Intensity Verification – video
FlapSpeed® PRO – 5/5 – Output File & Setup – video
The FlapSpeed® PRO has the following features:
- Meets and exceeds all existing Flapper Peening Requirements:
SAE AMS 2430, SAE AMS 2590, SAE AMS 2592, Airbus SMR 51-29-11, NADCAP AC 7117/3, NADCAP AC 7117/4, NADCAP AC 7117/5, Boeing BAC5730-2 rev D, MIL-R-81841, MIL-S-13165, Air Force TO 1-1-691, BAEP 2008 (Beechcraft), BAPS 185-002 (Bombardier), J441, J442, J443, J2597 as well as all OEM and Military Requirements including NATO Stock Number NSN 5130-20-012-8893 - Large robust 5.7 inch (145mm) QVGA color touch screen user interface
- Integrated Saturation Curve Solver with 2 types of magnetic correction (3M/SAE AMS2590 and 0.77)
- Small and powerful handpiece grinder with 25 ft (7.7m) cord
- Optimal rotational speed maintained at all times
- Automatically stops and sounds an alarm, if process limits are not respected
- Records critical process data to USB key
- Stopwatch and Countdown timer
- Multiple Languages and Measurement Units (inches and millimeters)
- Certificate of Calibration and User Manual
- Electrical supply from 110V to 220V, 50-60Hz
| Controller Dimensions | L22.0″ × W14.0″ × H9.0″(L559mm × W356mm × H229mm) |
|---|---|
| Controller Weight | 21 lbs (9.5 Kg) empty, 27 lbs (12.3 kg) fully loaded |
| Protection | Weather proof Impact resistant NK-7 Resin Exterior |
| CPU | TI AM3517 |
| Control Signal | Closed Loop Feedback using Proprietary Control Software |
| Response Time | 0.3 to 0.5 sec |
| Repeatability | +/- 50 RPM |
| RPM Monitoring | Continuous |
| Alarm | Ajustable when RPM is out of range |
| User Input curves | Almen Intensity vs. RPM for 5 operators |
| Data Recording | Yes, through included 2 Gb. Memory key |
| Real-Time Clock | Yes |
| Brightness Adjustment | Yes |
| Calibration Setup | Yes |
| Memory | Flash = 256Mb DDR2 |
| Display | 5.7 inch QVGA Color Display |
| Keyboard | Touch Screen |
| Motor Type | Brushless |
| Motor Input | 3.0 amp DC |
| Operating Temp. | 32°F to 122°F (0°C to +50°C) |
| Sensor Type | Integrated in motor |
| Handpiece Cord Length | 25 Ft (7.7m) |
| Electrical Input | 100-240V, 50/60 Hz, 3.1A |
| Certification | CE |
| Specifcations | SAE AMS 2590, SAE AMS 2592, Airbus SMR 51-29-11, NADCAP AC7117/4, Boeing BAC5730-2 rev D, MIL-R-81841, Air Force TO 1-1-691, BAEP 2008 (Beechcraft), BAPS 185-002 (Bombardier), J441, J442, J443, J2597 |
