Sitemap

Categories

• Pneumatic Tools & Accessories
  • Drills
  • Accessories
    • COLLETS
      • Typ A
      • Typ B
    • Replacement Roll for Trim Shear EC-7
  • Rivet Squeezer
    • C-Type Compression Riveter
    • Alligator-Type Compression Riveter
  • Pneumatic Tools
    • Pneum. Trim Shears
    • Rivet Guns
    • PNEUMATIC & HAND NIBBLER
    • Cable Swaging Tools
      • Swaged Cable Terminal Pull Tester Kit
      • Portable Swaging Machine Kit
  • Other Tools
• Hand Tools
  • Nut Plate Jigs
  • Deburring Tools
  • Hand Rivet Pullers
    • Rivet Accessories for Hand Rivet Squeezer
  • Hi-Lok Tools / Ratchets
  • Hole Finders
    • HALO Drill Position Targeting System
  • Precision Measuring
    • Countersink Gages
    • Cable Tensiometer
  • Screwdriving Tools / Bits
    • Bits
      • HI-TORQUE DRIVER
      • Phillips Bits
      • Slotted Bits
      • French Recess Insert Bits
      • MorTorq Spiral Drive Insert Bit
      • Socket Head (Allen) Insert Bits
      • Square Recess Insert Bit
      • SPANNER TAMPER RESISTANT
      • TORX INSERT BITS
      • Torq-Set Bits
      • Tri-Wing Insert Bits
      • Hand Bit Holder
      • Accessories
  • Safety Wire and Pliers
  • Squeeze Action Clamps
  • Miscellaneous
    • Inspection Mirrors
    • Rivet Cutters
    • Semco Sealant Guns
      • Air Hose Assemblies
      • Sealant Gun Retainers
      • Standart Nozzles
      • DISPOSABLE PLASTIC CARTRIDGES, PLUNGERS & CAPS
    • APPLICATION / REMOVAL TOOLS & ACCESSORIES
    • INstalling and Removal TOlls for Electrical Connector Contacts
    • Flaring Tools 37°
    • Slimsert - Hand Inserting Tools
  • Hi-Lok / Hi-Lite Tools
    • HI-LOK HEX KEYS
    • Tight Squeeze Hand Too
    • Pin Protrusion Gauges
    • HI-LOK HAND INSTALLATION TOOLS
    • HI-LOK QUICK CHANGE REMOVAL HAND ASSEMBL
    • HI-LOK-COLLAR QUICK CHANGE SOCKET REMOVAL SYSTEM
    • HI-LOK INSTALLATION TOOL KIT
    • HI-LOK REMOVAL TOOL KIT
    • HI-LOK INSTALLATION & REMOVAL TOOL KIT
    • HI-LOK COLLAR REMOVAL TOOLS
    • HI-LOK / HI-LITE INSTALLATION TOOLS WITH TORQUE CONTROL
    • Hi-Lok Installation Tools
• Riveting
  • Rivet Squeezers
    • C-Type Compression Riveter
    • Alligator-Type Compression Riveter
  • Rivet Guns
  • Rivet Guns & Blind Rivet Installation Tools
    • Pneudraulic Rivet Installation Tools
      • CHERRYMAX
      • CHERRYLOCK "A"
      • CHERRYLOCK
      • Commercial Blind Rivets / Nutplate Rivets
      • Commercial & Aerospace Blind Rivets
      • Lockbolts Blind Rivets & Blind Bolts
      • DOUBLE ACTION Blind Rivets & Blind Bolts
    • Nose Assemblies / Pulling Heads
      • CHERRYMAX
      • CHERRYLOCK "A"
      • CHERRYLOCK
      • Commercial Blind Rivets / Nutplate Rivets
      • Commercial & Aerospace Blind Rivets
      • Lockbolts Blind Rivets & Blind Bolts
      • DOUBLE ACTION Blind Rivets & Blind Bolts
    • Cherrymax Battery and Hand-Riveter
      • CHERRY PULLING HEADS FOR HAND RIVETER G800
    • Hand Rivet Tools
    • Visu-Lok / Composi-Lok I / II / III
      • Pneumatic Tools
      • Hand Tools
      • Gauges & Scales
    • Jo-Bolt Kits
  • Shavers & Accessories
    • Rivet Shavers
      • Zubehör für Nietfräser
        • Skirts for ZT405/ZT706
        • Skirts for SRS10P/S
        • Stabilizer for ZT405/ZT706
        • Cutter (Carbide Tipped)
          • Thread 1/4"-28
          • Thread 1/4"-26
    • Weld Shavers
      • ZT708 (2700 RPM)
        • Carbide cutter without chipbreaker
        • Carbide cutter with chipbreaker
        • Roller shaft assembly
      • ZT709 (13500 RPM)
        • Cutter
        • Groove cutter
        • Roller shaft assembly
      • ZT550 (15000 RPM)
        • Roller shaft assembly
        • Cutter
        • Groove cutter
      • ZT553 (3500 RPM)
        • Carbide cutter without chipbreaker
        • Roller shaft assembly
    • Super Shaver
      • ZT507C (12000 RPM)
        • Cutter shaft assemblys
        • Footpieces
          • Steel footpieces
          • Nylon footpieces
        • Carbide cutter
  • Bucking Bars
    • Steel Bucking Bars
    • Tungsten Bucking Bars
  • Rivet Accessories
    • Alligator-Type Yokes for pneumatic Riveters
    • C-Yokes for pneumatic Riveters
    • Rivet Sets
    • Rivet Squeezer Sets
      • Rivet Squeezer Sets, Flush Type
        • Body Diameter 1/2"
        • Body Diameter 3/8"
      • Rivet Squeezer Sets, Cupped Type
      • Dimple Dies
        • Male 100°
        • Female 100°
      • Rivet Squeezer Sets
    • Knock-out Punches
    • Snap Soc
    • Air Control Valves
    • Retainer Springs for Rivet Hammers
• Cutting & Drilling
  • Microstop Countersink Cages & Accessories
    • Microstop Countersink Cages without Swivel Shaft
      • ZT330 (up to 3000 RPM)
        • Skirts
        • Inserts
      • 444 (up to 10000 RPM)
        • Skirts
        • Inserts
      • ZT680 (up to 10000 UPM)
        • Accessories
      • 432 & 463 (Jumbo Size)
      • ZT331 (up to 3000 RPM)
        • Skirts
        • Inserts
      • ZT334 (up to 3000 RPM)
        • Skirts
        • Inserts
      • ZT691 & ZT692 (up to 6000 RPM)
    • Microstop Countersink Cages with Swivel Shaft
      • ZT680SW
      • EH356HP (up to 6000 RPM)
      • ZT666 / ZT667 / ZT668
        • ZT666 (Thread M6x1)
        • ZT667 (Thread M8x1)
        • ZT668 (Thread 1/4"-28)
        • Inserts
        • Skirts
  • Drill Bits
    • Drill Bit Accessories
      • Drill Stop
      • Drill Bushings
      • Punch Type Strap Duplicators
    • SOLID CARBIDE DRILL
    • COMPOSITE CUTTING TOOLS
    • Nutplate Countersink Drill
    • Cobalt Rivet Knockout Drills
    • DOUBLE MARGIN DRILL NAS 937
    • COBALT AIRCRAFT DRILLS
    • Threaded Shank Adapter Drills
  • Deburring Tools
  • Cutters
    • Back Spot Facer Cutter
    • Honeycomb Cutters
    • CARBIDE BURRS
    • Taper Router, 3 Flutes
  • Hole Finders
  • Pneumatic Tools
  • Reamers
    • Piloted Reamers with Straight Shank
    • Piloted Reamers with Threaded Shank
  • Other
    • Tube/Pipe End-Finishing Maschines
  • Sanding Discs & Accessories
  • Cut Fluid and Lubricants
    • COMPOSITE CUTTING TOOLS
    • Boelube Lubricant
  • Countersink Cutters
    • Countersink Cutters with Thread
      • HSS 100°
        • 1/4"-28 thread
          • 3 Flutes with solid pilot
            • Body Dia. 1/4"
            • Body Dia. 5/16"
            • Body Dia. 3/8"
            • Body Dia. 7/16"
            • Body Dia. 1/2"
            • Body Dia. 9/16"
            • Body Dia. 5/8"
          • 2 Flutes with solid pilot
            • Body Dia. 1/4"
            • Body Dia. 5/16"
            • Body Dia. 3/8"
            • Body Dia. 7/16"
            • Body Dia. 1/2"
            • Body Dia. 9/16"
            • Body Dia. 5/8"
          • 2 Fluites replaceable pilots
            • Replaceable Pilots
      • Cobalt 100°
        • 2 Flutes with solid pilot
          • M6X1 Thread
            • Body Dia. 10 mm (.3937)
        • 3 Flutes with solid pilot
          • M8x1 Thread
            • Body Dia. 14 mm (.5512)
            • Body Dia. 17 mm (.6693)
        • 2 Fluites replaceable pilots
          • M6x1 Thread
          • M8x1 Gewinde
      • Carbide Tipped 100°
        • Countersinks with replaceable pilots
          • MBBN549
            • Replaceable Pilots for MBBN549
          • 700 Serie
            • Replaceable Pilots for 700 Serie
              • 5/64" / 1,98 mm Shank
              • 3/32" / 2,38 mm Shank
              • 1/8" / 3,18 mm Shank
              • 3/16" / 4,76 mm Shank
              • 1/4" / 6,35 mm Shank
        • Countersinks with solid pilot
      • Hi-Lok Cobalt 100°/60°
      • Kevlar Counterinks 100°
      • Composite Countersink Cutters 100°
      • DAN5109 Countersink Cutters 100°, Carbide Tipped
      • Briles Countersink Cutter
      • Solid Carbide 100°
        • Countersinks with replaceable pilots
        • Countersinks with solid pilot
      • Accessoires for Countersink Cutters
        • Holder with internal thread
      • Carbide Tipped 130°
    • Countersink Cutters with Shank
      • HSSCo - STRAIGHT SHANK COUNTERSINK CUTTERS - 100°
      • 100° SOLID CARBIDE STRAIGHT SHANK COUNTERSINKS
      • 100° MINIATURE-STOP-COUNTERSINK CUTTER
        • REPLACEABLE PILOT FOR CUTTER TYPE 402
    • Back Countersink Cutter 100°
    • COUNTERBORES WITH STRAIGHT SHANK
      • REPLACEABLE PILOTS FOR CUTTER SERIES 488C
      • REPLACEABLE PILOTS FOR CUTTER SERIES 85
    • CARBIDE TIPPED STOP COUNTERBORES
  • Accessories
  • Hole Saws
    • HSS-HOLLOW-CUTTERS WITH THREADED SHANK 1/4"-28
    • HSS-HOLE SAWS WITH COARSE TOOTH
      • HOLE SAW ARBOR FOR SERIE 474
    • CARBIDE TIPPED HOLE SAWS
  • Offset Angle Drills
  • Rivet Hole Brush
  • Paint Cutter
  • Heli-Coil Tools
    • Hand Inserting Tools
    • Hand Taps
    • Thread Gages
• Cleco Fastening & Clamping Tools
  • Cleco Fasteners
  • Cleco Clamps
  • Cleco Installation Tools
  • Squeeze Action Clamps
• Brands
  • HUCK
  • Stahlwille
  • ATI Tools
  • SNAP-ON
  • Clayton
  • GAGE BILT